Hello all so as the heading suggests I deed some help .
So I'm trying to build up a P870KM out of parts I have but something Is bothering me . On both my 1070 and 1060 the unit powers down after around 2min of use .
GPU temps look ok in GPUZ 47° And CPU 45°
Could any one please give some advice as all I'm thinking is motherboard bios update / change .
Regards Damin
PS. I have updated a short video of the issue.
https://drive.google.com/file/d/1-G-eSImcCojqXorKAfmou3YgCNefcwC4/view?usp=drivesdk
-
So I updated the motherboard bios to BAKED'S unlocked bios for the KM and still the same issue
-
Are all the fans plugged in?
It might also be due to the vbios on the graphics cards is making the EC freak out. -
-
poprostujakub Notebook Consultant
Where's the good old Clevo, which worked with most of the GPUs available on the market...
-
Meaker@Sager Company Representative
Are the vbios files pre or post the nvidia structure change?
-
Attached Files:
-
-
I tried my other 1070 ... No luck
Could it be the power switch board my power switch board is from a P870DM3 and this is a P870KM .... I'm perplexed by this.Attached Files:
-
-
Meaker@Sager Company Representative
That's a release vbios by the looks of things.
-
So they should be working? -
Meaker@Sager Company Representative
29 is from 2016, put the full string into google to search it.
-
Is there a way to power on the motherboard without the power switch PCB connected to the motherboard
-
This is how the power button and lighting look on the P870DM3 Linked to my P870KM something looks wrong to me
Attached Files:
-
-
Would this cause this behavior looks like other with the KM have the 10DE 1BA1 GTX 1070
-
My one is 10DE 1BE1 GTX 1070
-
Meaker@Sager Company Representative
You could try shorting the contacts but that could be a bit dicey.
-
-
Anyone with some deep technical knowledge on the P870G2/3/KM/TM out there that can help ? (After 3 min just a flashing orange LED light over the solution d green light)
P870KM Help
Discussion in 'Sager and Clevo' started by Damin, Nov 7, 2019.