Hi, I have a P150HM with a 485m.
I bought it on EBay with „for Spareparts only“. The First Time I turned it on I have a picture and I was able to go to the Bios. Then I decide to repaste the GPU. Since I repaste it I always get a Blackscreen. Also tried to get my 7970m V1.2 with modbios working. But there is also a Blackscreen. I am mit sure if it is the Mainboard it the GPU. And there is also a Little Spark when I pur in any GPU.
Someone who can help me?
-
Did you remove battery and power cord before you opened it up?
-
No, I didn‘t remove the battery.
-
Meaker@Sager Company Representative
The HM needed a specific revision of the card and vbios to work IIRC.
-
Do you mean the 7970m?
-
Hi mate,
Nothing to do with your topic sorry, is that a Tornado on the picture of your avatar? Which aircraft was the picture taken from? -
Yes, this is a Tornado. And the picture is taken from an Airbus A400M.
-
Meaker@Sager Company Representative
-
It‘s the V1.2 with the bios in the Thread here.
-
Meaker@Sager Company Representative
What do the capacitors between the inductors look like?
-
Do you have a picture from what you mean?
-
Meaker@Sager Company Representative
On my phone today but inductors are the big squares and the capacitors between them are the black rectangles.
-
-
that looks like a burned die
-
It only Looks like. The card is working in my Medion Erazer X6811 with 2630qm 16F2 Mainboard
-
Is it possible that a 580m taken from a P170HM Works Plug and Play?
-
Meaker@Sager Company Representative
Yes, that should be OK IIRC.
Problems with my Clevo P150HM
Discussion in 'Sager and Clevo' started by razor0601, Dec 24, 2018.