How easy is to swap out screens and then swap them back. I ask because my friend would like to do some tests and if its not a super pain in the butt that would be great.
-
Meaker@Sager Company Representative
It's fairly easy to do and does not need the entire thing to be taken apart. Couple of screws, remove bezel and you are in at the screen assembly.
You could easily make a mistake and damage it however which would not be covered under warranty.bennyg likes this. -
If you need to swap the display cable the procedure is more involved.
There's the standard 1080p60 cable and the upgraded higher bandwidth cable for the 3K/120hz 4K/60hz panels - depends on whether OP is talking swapping same models for test or for upgrade
Full step by step: (predecessor P870DMG but should be extremely similar):
https://www.techinferno.com/index.p...vo-p870dm-g-from-fhd-to-4k-picture-guide-r52/ -
Eurocom Support Company Representative
Question regarding the p870dm3 and p870km1-g
Discussion in 'Sager and Clevo' started by paulofeg, May 29, 2017.