I was wondering if is possible to change the GPU on sager NP8130 and if so is it that hard? thanks for your time
-
Anthony@MALIBAL Company Representative
Changing the card out is simple though. Unscrew the bottom access panel, then remove the screws holding down the heatsink to the GPU and pull the heatsink off. The card should just be pulled out after that. Swap in the new card, reapply thermal paste, put back the heatsink (you may need to buy a new heatsink if you change cards as well, to be compatible with the new card), put the panel back on, and you're done.
It sounds complicated, but it's pretty quick. -
thanks malibal#2!! I hope not to replace it for awhile but just wanted to know just in case I lagged to much in BF3. Reapplying the thermal paste is a bmmer becasue I got the IC thermal compound. oh well just 20 more bucks
-
actually its quite cheap around 10 bucks for ic diamond.
-
i just bought the sager np8150 and in the future i may want to upgrade the gpu, do you guys know any good places to buy GPU's like the GTX 485M?
-
-
Follow-up question to the replacing GPU debate.
Assuming one upgrades their GPU to a 6990m, they would also need to update to the latest CLEVO Bios that recognizes a 6990m? Or will it not matter and just shows 6900 series and work fine? -
saturnotaku Notebook Nobel Laureate
-
Saturn makes a fair point, but there are people on these boards who sell GPUs for very reasonable prices brand new from manufacturers.
That said, the additional cost of a PSU/Shipping does make it more economical to purchase it immediately, but it is nice to have a good option for those who made mistakes! -
For example, in case you made mistake and now you want to upgrade to 6990M
http://forum.notebookreview.com/computer-components/598812-fs-6990m-brand-new-free-heatsink.html
Replacing GPU for sager
Discussion in 'Sager and Clevo' started by SkubaStew, Jul 28, 2011.