The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Sager Lackluster Volume Levels Mod

    Discussion in 'Sager and Clevo' started by volkov956, Nov 29, 2012.

  1. volkov956

    volkov956 Notebook Guru

    Reputations:
    8
    Messages:
    50
    Likes Received:
    0
    Trophy Points:
    15
    Do you have a D901, D900C, D900F, NP9262, NP9280, NP9285 etc

    If you are experiencing low volumes since purchase is there a quick well as quick as u can disseble the laptop. You cut off the Plastic Case Frame Grid off the Speaker Covres leave the Speaker mesh or the speakers will be totally exposed. When u do the mod you will notice a large area of the speakers are covered by the frame grid causing lots of lost audio and improper Acoustics in some cases. as well if your speakers sound kinda off check ur speakers for any bit of metal stuck to them I have had to remove small bits of metal that worked theyre way in from the Latch holes for the lcd in the front to the speakers somehow causing distortion in the speakers. the size of the metal was a very very small shaving and caused heavy distortion.

    Could work on other sager models I am goining to take a look at the NP7280-85 X7200 model next to see if there is any speaker mods that will work for that as well
     
    volkov956, Nov 29, 2012
    #1