Hello,
My Sager NP8268-S is not booting. It randomly shut down mid game and I haven't been able to get it to turn on since. When I press the power button, the CPU fan will run for about 20 seconds, but then the computer will turn off again. I have taken out ram and replaced it, but that didn't change anything. The computer is about 3 years old.
Specs:
i7-4810MQ
MXM 880m
16 GB 1600mhz ram
Any help would be appreciated.
Video:
-
-
Meaker@Sager Company Representative
Try booting without the GPU installed and see if you get a display.
-
-
-
Also unplugged the CMOS battery for a bit and plugged it back in. Made one of the status lights turn on once but did the same thing.
-
Meaker@Sager Company Representative
Try taking out the CPU, see if it reacts the same way but I am suspecting CPU power circuitry failure.
-
-
Meaker@Sager Company Representative
The power circuitry for the CPU is on the motherboard, so it would be a motherboard issue.
-
-
Meaker@Sager Company Representative
Some different behaviour basically, does it turn itself off, does it stay on that kind of thing.
-
I have the same Laptop and same problem. When I pull the CPU nothing at all happens
-
Meaker@Sager Company Representative
Then it's likely a dead motherboard.
-
So if anyone wanted to know, DONT buy Sager. Only 2 years in and then the MB dies and they want over $650 to fix it. That's almost half of what I paid for it 2 years ago.
-
Meaker@Sager Company Representative
-
You can check mosfet Keys on 19v line, some times they are burn inside and laptop power line near a dc jack and battery area get 3v/5v instead 19v.
Sent from my SM-G955F using Tapatalk
Sager NP8268-S not booting (fans turn on, but not screen)
Discussion in 'Sager and Clevo' started by Piecrust234, Jul 28, 2017.