The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Temps for the 9262

    Discussion in 'Sager and Clevo' started by bperry, Jan 22, 2009.

  1. bperry

    bperry Notebook Guru

    Reputations:
    5
    Messages:
    68
    Likes Received:
    0
    Trophy Points:
    15
    I actually have done a search so sorry cause I know this has been written about a lot here but.....

    What are the idle, under load such as a game and max temps of the hardware?

    I just installed CPUID and had all 3 hard drive in the note book. It said the 3rd 1 I had installe was too hot and I cant rember what the temp was. Thought I took a screen shot but I didnt. If I remember the Temp was like 150F I could be wrong. Also the 2 HD I have in Raid 0 dont show temperatures why?

    I have 2 200Gb Momentus 7200.2 HD's installed Raid 0 normally 1 under the battery and 1 in the middle HD tray. I wanted to try Windows 7 so I installed a older Momentus 100Gb 7200.1 in the spare slot for the HD bay. I noticed that the Windows 7 was acting laggy so I switched to XP and it to wasn't right so I downloaded CPUID.

    My temps are as follows
    THMO Min (41C)(105F) MAX(53C)(127F)
    Core #0 42 56
    1 42 52
    2 35 51
    3 45 58

    GPU 9800GT 1
    57 69
    GPU 9800GT 2
    50 64

    This is with the Fn 1 full speed fans
    the minimum represents the computer at idle and the max represents while playing Call of duty 4.

    LMK if those are ok.

    Also I removed the third hard drive and and went back to the 2 in Raid 0. I felt with all three drive that the 2 in the middle were getting cooked. Is there a way to prevent them from getting to hot or is that normal?

    TIA
     
    bperry, Jan 22, 2009
    #1
  2. Shyster1

    Shyster1 Notebook Nobel Laureate

    Reputations:
    6,926
    Messages:
    8,178
    Likes Received:
    0
    Trophy Points:
    205
    Your temps all look perfectly fine.
     
    Shyster1, Jan 22, 2009
    #2
  3. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    berry...only worry about temps when they get above 80 to 85 degrees... allot of temp stuff is based on your room temp.

    as shyster1 said...they are perfectly fine.
     
    Johnksss, Jan 22, 2009
    #3
  4. bperry

    bperry Notebook Guru

    Reputations:
    5
    Messages:
    68
    Likes Received:
    0
    Trophy Points:
    15
    Cool no pun intended..

    Also why cant I see the Radio HD temps?
     
    bperry, Jan 22, 2009
    #4
  5. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    radio?
    oh raid..because it wont read raid temps...probably because it's not a real raid card im thinking (like in a desktop computer)

    out of raid it reads temps fine though.
     
    Johnksss, Jan 22, 2009
    #5
  6. Loggie

    Loggie Notebook Evangelist

    Reputations:
    130
    Messages:
    476
    Likes Received:
    0
    Trophy Points:
    30
    Your GPU idle temps don't look quite right-particularly Gpu 1. I say this because you stated that you have your fan running at high speed (Fn+1). My single 9800GT idles at 41C with the fan running at low-medium speed and even lower than that with the fan running at max speed. Although none ot the GPU temps you posted are anywhere near the danger point, they do seem to be somewhat higher than they should be.
     
    Loggie, Jan 22, 2009
    #6
  7. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    do you have a sli rig? i see you say one gpu, but didn't see that it was in sli mode running a constant x16 @ room temp being about 75 to 80 degrees...things like this account for gpu temps being a bit higher than others.

    i can et both of mine below 40c's but then the room temp would have to be in the 60's for that to stay a constant... :)
     
    Johnksss, Jan 22, 2009
    #7
  8. Loggie

    Loggie Notebook Evangelist

    Reputations:
    130
    Messages:
    476
    Likes Received:
    0
    Trophy Points:
    30
    A bit higher is right 10-15C higher. I'm glad I chose not to go with a dual 9800's.
    By the way my room temp is in the low 70's and I never use the fan on high speed.
     
    Loggie, Jan 24, 2009
    #8
  9. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    what rig are you running again?
     
    Johnksss, Jan 24, 2009
    #9
  10. Loggie

    Loggie Notebook Evangelist

    Reputations:
    130
    Messages:
    476
    Likes Received:
    0
    Trophy Points:
    30
    I am running a NP9262 with a single 9800GT card and a E8500 CPU.
     
    Loggie, Jan 25, 2009
    #10
  11. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    that's why it's lower in temps. sli is always higher. it wont drop unless you go on battery power or disable one card.

    but i am curious though..while running single card, does yours drop from x16 to x1?? i haven't been able to get mine to do that. it stays locked at x16.
     
    Johnksss, Jan 25, 2009
    #11
  12. dazzyd

    dazzyd Notebook Evangelist

    Reputations:
    111
    Messages:
    498
    Likes Received:
    2
    Trophy Points:
    31
    just a quick question.. has anyone experienced a continuous beeping sound for brief period.. then stops then continues again..while the laptop screen is off..(the lappy is still running)

    could it be over temperature notification.??

    hmm further to this.. it behaves like the battery low alarm except that my laptop is plugged in.

    and it also happens at around 7 am around the dot for the last 2 days now..? have i set some alarm somewhere accidentally.??
     
    dazzyd, Jan 26, 2009
    #12
  13. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    what is your bios and kbc bios versions?

    i think gophn & theriko said it has to do with one or both of them.
     
    Johnksss, Jan 26, 2009
    #13
  14. bperry

    bperry Notebook Guru

    Reputations:
    5
    Messages:
    68
    Likes Received:
    0
    Trophy Points:
    15
    what is x16 and x1?

    Yes I have a SLi rig see sig. The room temp is mid to high 60s actually.
     
    bperry, Jan 26, 2009
    #14
  15. Eivind

    Eivind Notebook Evangelist

    Reputations:
    87
    Messages:
    668
    Likes Received:
    0
    Trophy Points:
    30
    Talk in Celsius like normal people do =)
     
    Eivind, Jan 26, 2009
    #15
  16. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    if you look at gpuz it will show your bus interface at either x16 or x1. being pci-e lane speed for gpu's
     
    Johnksss, Jan 26, 2009
    #16
  17. Loggie

    Loggie Notebook Evangelist

    Reputations:
    130
    Messages:
    476
    Likes Received:
    0
    Trophy Points:
    30
    I had to download GPUZ to answer this but it says for Bus Interface:
    PCI-E x16 @ x16 so the answer is it stays at x16.

    By the way, I only have one card. I imagine that even if the second card is not used that it is still getting clocked and generates some heat which could raise the internal laptop ambient temperature somewhat.
     
    Loggie, Jan 27, 2009
    #17
  18. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    hummm, that's weird. i have been trying to figure out how to drop that pci-e down to x1 for the longest. on my hp and my gateways, they all dropped to x1 when i was not doing any heavy graphic work, but my d901c won't. that saves on voltage/heat & battery.

    i found a pic of my temps
    [​IMG]
     
    Johnksss, Jan 27, 2009
    #18
  19. Shyster1

    Shyster1 Notebook Nobel Laureate

    Reputations:
    6,926
    Messages:
    8,178
    Likes Received:
    0
    Trophy Points:
    205
    @johnksss:

    There's an older thread in the hardware upgrades forum here that discusses successfully configuring an _HP sytem so the PCI-Express bus either stays @x16, or is allowed to drop to @x1 - perhaps there might be something useful on that thread?
     
    Shyster1, Jan 27, 2009
    #19
  20. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    those things we're first on my list of to do's.... nothing worked thus far. i don't think there are any np926x'S dropping link state.....
     
    Johnksss, Jan 27, 2009
    #20
  21. bperry

    bperry Notebook Guru

    Reputations:
    5
    Messages:
    68
    Likes Received:
    0
    Trophy Points:
    15
    Hmm I have the CPUZ and under bus it says x6. Is that supposed to be x16??
     
    bperry, Jan 27, 2009
    #21
  22. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    what? what? what? how you get a x6??

    try running windows wei and see if it jumps up to x16.
    i say wei, because it doesn't go full screen and allows you to see what's going on.
    you'll have to close cpu z once wei starts then reopen to see if it changed.
     
    Johnksss, Jan 27, 2009
    #22
  23. theriko

    theriko Ronin

    Reputations:
    1,303
    Messages:
    2,923
    Likes Received:
    4
    Trophy Points:
    56
    johnkss, he's running CPUZ...

    no, cpuz reports the cpu fsb multiplier GPUZ reports graphics card things
     
    theriko, Jan 27, 2009
    #23
  24. bperry

    bperry Notebook Guru

    Reputations:
    5
    Messages:
    68
    Likes Received:
    0
    Trophy Points:
    15
    ohh is it supposed to be gpuz?


    sry let me try again
     
    bperry, Jan 27, 2009
    #24
  25. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    oh, thanks riko, i thought he was looking at the main motherboard tab that shows the gpu link state...lol.
     
    Johnksss, Jan 27, 2009
    #25
  26. bperry

    bperry Notebook Guru

    Reputations:
    5
    Messages:
    68
    Likes Received:
    0
    Trophy Points:
    15
    GPUZ the multiplier is x16.

    What is the CPU multiplier. Mine is x6 at idle and x8.5 under load.

    Also the core speed jumps from 1995.2 to 2826.8 mhz. I assume that is the speed of the cpu idle its a 2ghz and under load its a 2.8ghz??
     
    bperry, Jan 27, 2009
    #26
  27. theriko

    theriko Ronin

    Reputations:
    1,303
    Messages:
    2,923
    Likes Received:
    4
    Trophy Points:
    56
    So it does...I hadn't noticed that...
     
    theriko, Jan 27, 2009
    #27
  28. dazzyd

    dazzyd Notebook Evangelist

    Reputations:
    111
    Messages:
    498
    Likes Received:
    2
    Trophy Points:
    31
    any one have any clues. as to my above problem. thanks in advance
     
    dazzyd, Jan 27, 2009
    #28
  29. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    never seen you answer this yet...
    post #13
     
    Johnksss, Jan 27, 2009
    #29
  30. dazzyd

    dazzyd Notebook Evangelist

    Reputations:
    111
    Messages:
    498
    Likes Received:
    2
    Trophy Points:
    31
    Rightio.!!

    Bios version 1.00.13S LS1

    KBC version 1.00.08Nc
     
    dazzyd, Jan 28, 2009
    #30
  31. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    Johnksss, Jan 28, 2009
    #31
  32. dazzyd

    dazzyd Notebook Evangelist

    Reputations:
    111
    Messages:
    498
    Likes Received:
    2
    Trophy Points:
    31
    cheers johnkss but the ftp links dont seem to work.??

    is there a guideline of installing these.

    also i have o/c my gfx with the modded vgabios... will this new bios affect it in anyway.??
     
    dazzyd, Jan 28, 2009
    #32
  33. theriko

    theriko Ronin

    Reputations:
    1,303
    Messages:
    2,923
    Likes Received:
    4
    Trophy Points:
    56
    theriko, Jan 28, 2009
    #33
  34. Bill F

    Bill F Notebook Consultant

    Reputations:
    8
    Messages:
    107
    Likes Received:
    0
    Trophy Points:
    30
    Bill F, Jan 28, 2009
    #34
  35. Johnksss

    Johnksss .

    Reputations:
    11,536
    Messages:
    19,464
    Likes Received:
    12,852
    Trophy Points:
    931
    something to do with the bluetooth not being recogonized when the cable is plugged in on the motherboard or something like that is the explination they give
     
    Johnksss, Jan 28, 2009
    #35
  36. dazzyd

    dazzyd Notebook Evangelist

    Reputations:
    111
    Messages:
    498
    Likes Received:
    2
    Trophy Points:
    31
    looks like i have to try to get those new bios later..its still not downloading
     
    dazzyd, Jan 28, 2009
    #36
  37. dazzyd

    dazzyd Notebook Evangelist

    Reputations:
    111
    Messages:
    498
    Likes Received:
    2
    Trophy Points:
    31
    right i have these new bios updates.. now how to install them.

    thanks in advance
     
    dazzyd, Jan 29, 2009
    #37
  38. dazzyd

    dazzyd Notebook Evangelist

    Reputations:
    111
    Messages:
    498
    Likes Received:
    2
    Trophy Points:
    31
    any takers to the above question.?? :D
     
    dazzyd, Jan 30, 2009
    #38