I am planning to put two msata ssd in np8275-s in raid 0 configuration in my NP8275-S. My question is whether trim will work or not ?
I read somewhere that trim doesn't work in raid 0 setup.
-
Yes they do work. Make sure you install the latest Intel Rapid Storage Technology. The ones listed on Sager's site is out of date. Use the ones on Clevo's site.
CLEVO Driver Download
Follow videos (on Youtube or w/e) on how to set up RAID (using Intel RST), and you should be fine.
You are going to need: Intel Rapid Storage Technology driver (12.5.0.1066) for Windows 8 and RAID driver for Windows 8.
For "RAID driver for Windows 8", make sure you use the x64 bit one.
Oh, and this is for Windows 7 AND Windows 8 if you haven't noticed by now.
If Clevo's site is too slow, use this: https://downloadcenter.intel.com/De...apid+Storage+Technology+(Intel®+RST)&lang=eng
So, yeah...
When you install Windows, use f6flpy-x64.zip first, and then when you boot up in Desktop mode, open up SetupRST.exe. -
Thank you CoolPrizes
Two msata ssd in np8275-s in raid 0 and trim support
Discussion in 'Sager and Clevo' started by sam_t610, Aug 8, 2013.