The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    m571ru with 5.1 sound?

    Discussion in 'Sager and Clevo' started by tuncayt, Jan 18, 2008.

  1. tuncayt

    tuncayt Notebook Enthusiast

    Reputations:
    0
    Messages:
    23
    Likes Received:
    0
    Trophy Points:
    5
    hi all, i want to play dvd with 5.1 sound . so there s a problem with connection equipment.. my 5.1 sorround system cant allow Optical connection, so only way it is connect to analog cable , any information or help for this problem??

    sorry for english...
     
  2. Gophn

    Gophn NBR Resident Assistant

    Reputations:
    4,843
    Messages:
    15,707
    Likes Received:
    3
    Trophy Points:
    456
    I went over this for the previous model.

    the audio output on the Clevo M570U is as follows:

    - headphones or 2/2.1 speakers (even from TV speakers) can be connected to headphone jack
    - analog multi-channel (up to 8-channels) can be connected to each jack

    Read this:
    http://forum.notebookreview.com/showthread.php?t=96437&page=3

    This is the SPDIF cable that you would use to connect to your multi-channel receiver:
    http://www.ramelectronics.net/audio...gital-audio-3-5mm-to-rca-spidf/prodSPDIF.html
    [​IMG]

    Its a 3.5mm minijack to RCA SPDIF cable.

    Remember that your Realtek Software must be configured to whatever speaker output that you want.
     
  3. tuncayt

    tuncayt Notebook Enthusiast

    Reputations:
    0
    Messages:
    23
    Likes Received:
    0
    Trophy Points:
    5
    thx for ur answers i ll try