The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    power cord for my sager NP8690

    Discussion in 'Sager and Clevo' started by dukesucks, Nov 29, 2011.

  1. dukesucks

    dukesucks Notebook Enthusiast

    Reputations:
    0
    Messages:
    40
    Likes Received:
    0
    Trophy Points:
    15
    The power cord for my sager NP8690 is fraying. This is the cheap bit before the AC converter (expensive bit). I want to replace it asap but I can't find a obvious choice. It has e55943 written on the cord with 7A and 125V. Most replacements that amazon sells do not have the amps or volts reported. Do I have to match these? I found one that stated 110V.

    Please help. I don't want my cord to go and not be able to play Skyrim.

    Thanks.
     
    dukesucks, Nov 29, 2011
    #1
  2. Support.4@XOTIC PC

    Support.4@XOTIC PC Company Representative

    Reputations:
    130
    Messages:
    605
    Likes Received:
    37
    Trophy Points:
    41
    Are you talking about the actual portion of the assembly that plugs into the wall, or the cord that comes off of the adapter that goes into the computer? If it's that cord coming off the adapter I would generally recommend replacing the whole thing, since it is a piece specifically designed for the machine,
     
    Support.4@XOTIC PC, Nov 30, 2011
    #2