![]()
Let make BURN-IN test at these settings and compare MAX temps.Run for 5minutes,laptop on table,no cooler.Im running at 90C.
-
86 w/ ICD7 and a notepal U3
-
Kinda warm in my room, sat at 79-80c whole time
Notepal U2, ICD7, and Foiled -
no coolers please
-
exposed... is that at 1920x1080?
-
yeah, same settings he has checked
-
wow your heatsink must have slightly better pressure
-
no fan, slightly raised for better cooling, 79-80c after 5 mins. Gelid GC Xtreme paste.
-
81-82C after 20 min with max settings (max AA, max AF, extreme burnin mode etc)
Sent from my GT-I9001 using Tapatalk 2 -
I actually get better temps with extreme burn in lol
-
82C Max with those settings. I have ICD7, no coolers, sitting on desk, and room is around 25.5C/78F.
-
81C after 10 minutes on extreme burn-in. Notebook fans not even near 100%, FN+1 would surely result in even lower temps. Using ICD thermal paste.
-
yeah i get 74/75 after 10 min of the extreme burn in
-
I have the Gelid GC Extreme paste in my desk, scared to take the IC diamond off because it scratches the surface of the gpu/cpu on removal=/
-
just dont belive it
i have these temps on my asus -
84C with overclock. Core:1003 Mem:1400
-
-
Just got my laptop....after 15 minutes at 1920x1080 no AA, it was 56 degrees Celsius.....What am I doing wrong?
Nvm fixed it I got 86 -
Sent from my GT-I9001 using Tapatalk 2 -
today morning with cooler temp in my room I get 86 max
looks like same as others so I think its normal -
-
running furmark is like slapping your own you know what
I would recommend running kombuster for 30 min or so -
Ran it for over 5 mins max was 67c.. that's when my ambient temp is 29c....
-
I'm hitting the 93-94c range, running at 1000/1500 clocks. I think I may do a repaste.
-
ok so like just ran it again today...im at standard clocks and its hitting 91 after 5 minutes, is that bad? and how should i fix this...ive done no mods to this laptop
-
I am getting:
81 with cooler
78 with cooler and max fan (Fn+1)
83 with no cooler and regular fan settings.
I just did foil mod and added some copper mini heatsinks.
Wish it was lower.
Note: My prior numbers were on the wrong setting.
what is your Furmark temp?
Discussion in 'Sager and Clevo' started by fantomasz, Jul 9, 2012.