yes, mine does not have a Gen2 USB controller but Gen1 Typ C.
-
Meaker@Sager Company Representative
What's the device hardware ID?
-
What cpu?
-
Can you do some benches? what are the frequencies when all the cores are loaded?
-
currently finished undervolting this but i am unwilling to bench it again as of right now i ran a prime for stability for 3 hours with no problems and also tested this with 3d mark temps reached 82c but i had no freezes or anything like that
used throttle stop with -90mva which for me is the sweet spot it goes from 2,9ghz up to 4ghz basically it is an 8700
https://valid.x86.fr/tn0rky -
My gtx 1060 in game heats up like 87 to 89 degrees always in battlefield 1 and rainbow siege even if on the low preset. is there solution for that?
Gesendet von meinem Mi A1 mit Tapatalk -
You'll need to repaste the GPU with a decent paste.
-
Can you recommend one please? id be glad if its cheaper.
Gesendet von meinem Mi A1 mit Tapatalk -
Considering the bad fit, ICDiamond or TK3 is your only real option.
-
Meaker@Sager Company Representative
Thermal grizzly works well too and it does not tend to dry out.
sicily428 likes this. -
Nothing called TK3 http://forum.notebookreview.com/threads/absolute-best-thermal-compound.808945/page-4#post-10601953sicily428 likes this.
-
IC Diamond 7 or Gelid Extreme would be recommended
-
Thank you for your replies. So i have to choose between
Thermal Grizzly TG-C-001-R or
IC Diamond 7 but which.
And can repasters please tell me how are their temps?Last edited: Aug 21, 2018 -
SWTOR running at 4K @ 60fps, Enhanced Shadows enabled
Load on GTX1070: 1740MHz, memclocks 4500. (+150/+500)
Temp: 61C
Paste: ICD7Plinius likes this. -
this model has 1070 version too?
Gesendet von meinem Mi A1 mit Tapatalk -
Found a better map area for load, 1920 clocks on GPU, 74C temp.
No sorry, I have a PA70HS-G, thought you were just looking for repaste temps. -
Meaker@Sager Company Representative
Not on this one, grab the IC diamond. -
İs there screw map to reach gpu? only 3 screws for cpu area as i know.
Gesendet von meinem Mi A1 mit Tapatalk -
Meaker@Sager Company Representative
You need to take the chassis apart basically.
-
Hello,
does anybody have an unlocked bios for N957-TP6? The one that came with my machine is a little basic, well let's say 'very basic'! I still don't understand why any vendor would do that to fairly high performance design. -
Does anyone having issue with fn control of brightness? it just suddenly wont work anymore. The other buttons like touchpad etc fine.
Gesendet von meinem Mi A1 mit Tapatalk -
met a problem and this time it seems i will need help
the gpu is idling at 139mhz and refuses to go to gaming speed i tested various remedies software based as ddu and install of newer drivers ,yet i am unable to resolve this , i have this laptop for a month but didnt test it on games till this week -
Prostar Computer Company Representative
Sometimes it's an LCD or video cable defect. Have you tried reinstalling/updating the Intel Graphics driver? -
yeah i have updated to latest on clevo site. İ can change brightness in windows settings or in cc by the way.
Gesendet von meinem Mi A1 mit Tapatalk -
Meaker@Sager Company Representative
What are your nvidia and system power profiles set to? -
all are set to best performance both in control center ,nvidia settings and power plan . i even set default gpu the nvidia one .yet upon trying to play or run furmark gpu stays at 139 idle speed.
Skyrim crashes on 10 minutes and really slow movements drivers are the latest of clevo
i attach a picture of a test where it is shown that gpu stayed at 139mhz
Last edited: Aug 25, 2018 -
About brightness fn buttons not working problem, I have reinstalled my old intel hd graphics driver and now its working. Can confirm it caused by new update on the clevo website.
-
ok after a bunch of tries of test and fails i succesfully resolved this ,there was a conflict between control center and windows power plan which automatically reduced gpu speed . ( stupid of microsoft to limit without warning ) what is resolved is the speed that now goes beyond idle speed ,yet i cant seem to run furmark or 3dmark properly need more digging ,at least i saved shipping money for the time being for warranty purposes ,would be thankfull if anyone has a proper bios ,the one shipped with this is too basic for my liking
-
Meaker@Sager Company Representative
What profile is ccc set to?
-
After repasting with icd 7 heat of cpu and gpu was almost same maybe even worst. Ultra and high settings bf 1 always peaks at 90-88.
Gesendet von meinem Mi A1 mit Tapatalk -
Meaker@Sager Company Representative
Take the heatsinks off and take a picture of both sides of the contact pattern left.
-
Is there somewhere I can buy parts for it in Germany/Europe? I need a replacement battery.
Laptop Model: Clevo n957TP6
Battery Model: N950BAT-6 -
Meaker@Sager likes this.
-
İ will take photo today couldnt get to because of my work. İ also captured video footage of for honor. İts almost 90 grad on max fans. Even with 60 fps locked.
Gesendet von meinem Mi A1 mit Tapatalk -
Has anybody tried to run a 8700K or a 8600K in this Laptop? I know it's not recommended and will probably void the warranty because the cooling is not designed for these 95W TDP processors - I am just curious if anybody tried and what the outcome was.
Thanks
Paul -
Meaker@Sager Company Representative
Not sure anyone has tried considering you can use something like the 8700 which is going to get the most out of it.
-
i dont think this laptop could handle 95w cpu. i got i7 8700 in mines it doesnt throttle but it goes high as 85-90 in battlefield.
Can anyone please tell me hows their ultra settings gaming and idle temperatures?
Gesendet von meinem Mi A1 mit Tapatalk -
Is there prema bios for this model ? Also the fn+2 or fn+3 for fans wont work on my laptop is it normal?
Last edited: Sep 19, 2018 -
What do you expect FN+2 and FN+3 to do? In the clevos I've owned, **only FN+1** turned on/off max fans. No other FN+<key> combos with the exception of maybe FN+D would do a BIOS reset.
-
well i heard on the many clevos pressing fn+2 or +3 sets fan to medium or custom.
Gesendet von meinem Mi A1 mit Tapatalk -
I guess anything is possible, but for the 4 different Clevos I've owned, although they are different models (purchased in North America) I've never seen that type of functionality.
Last edited: Sep 19, 2018 -
Meaker@Sager Company Representative
No Prema BIOS as it's not really the intended purpose of this model. -
İ understand. May i ask you why theres no auto max fan option? both cpu and gpu hits 90 degrees even after repasting good and i hate always pressing max fan button.
Gesendet von meinem Mi A1 mit Tapatalk -
Meaker@Sager Company Representative
The machine is tuned for volume in that sense rather than out right performance. -
but in the clevo control center in custom fan settings max speed is 80 for everyone i saw. Why?
Gesendet von meinem Mi A1 mit Tapatalk -
Because low noise will beat higher noise. People ask for laptops with lowest possible noise. If the hardware run +90C degrees, Oh'well it's still below throttling point. See... Apple they prefer 100c instead for higher fan noise.Ashtrix likes this.
-
well.. id rather low heat with really high noise. That would be nice to have option like that.
Gesendet von meinem Mi A1 mit TapatalkPapusan likes this. -
After flashing 1.07.08 bios, Sound Blaster Cinema 3 started giving "There is no supported audio device avaliable" error. Tried reinstalling drivers and sbc program but no work.
*** Official Clevo N950TP6 / N957TP6 / N950TD / N957TD Owner's Lounge ***
Discussion in 'Sager/Clevo Reviews & Owners' Lounges' started by sicily428, Jan 4, 2018.