The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    NP700Z5B-S01UB - Hard drive caddy & disassembly tips?

    Discussion in 'Samsung' started by zeth006, Feb 9, 2015.

  1. zeth006

    zeth006 Traveler

    Reputations:
    83
    Messages:
    2,796
    Likes Received:
    1
    Trophy Points:
    55
    Any idea where I can find the right hard drive caddy for this notebook? Planning to swap in an SSD and have it running alongside the HDD. I'll probably have to remove the DVD drive to pull this off. Also will probably need a disassembly guide for doing all this.
     
  2. John Ratsey

    John Ratsey Moderately inquisitive Super Moderator

    Reputations:
    7,197
    Messages:
    28,841
    Likes Received:
    2,165
    Trophy Points:
    581
    See this thread which is in the sticky list for the caddy.

    And there's detailed disassembly for the Z5A here. If that isn't sufficiently similar then search around for NP700Z5C disassembly.

    John
     
    zeth006 likes this.
  3. zetsui

    zetsui Notebook Enthusiast

    Reputations:
    0
    Messages:
    32
    Likes Received:
    0
    Trophy Points:
    15
    samsungparts.com get the part number and ebay it for cheaper

    The MOST IMPORTANT part of disassembly is keeping yoru screw order, and making sure the laptop/hinges etc shut. The rest is super easy especially the HDD caddy

     
  4. Dannemand

    Dannemand Decidedly Moderate Super Moderator

    Reputations:
    11,330
    Messages:
    4,414
    Likes Received:
    2,163
    Trophy Points:
    231
    I watched that second video. Boy, I don't want to ever have to remove that glued screen bezel on my Series 7...