hello,
I have a problem with my x20,I changed the display cable, take the opportunity to clean dust, lit it before finishing to assembly and all was well.
the problem that at the end of assembly, no turn on, only turn on with AVStation button, but it takes a second on turn off. in screen only is displayed Sansung and finish, please wait, turns off.
I have proven with other memory,battery, battery bios and is equal.
where is the problem?
greetings
-
John Ratsey Moderately inquisitive Super Moderator
I would try reseating the RAM again. If that is the problem then the computer can't boot.
Does absolutely nothing happen when you press the on button? Or is there a very brief hint of life?
Otherwise, dismantle then reassemble again. Somewhere there is a connector problem.
John -
I put four different memories,and when to press button do not absolutly nothing only with the two AVStation button.
All connector are ok. I dismantle and reassemble 20 times
any suggestions?
How I do reset the bios? I removed the battery and nothing. -
solved, was the power button problem.
thanks -
John Ratsey Moderately inquisitive Super Moderator
Thanks for the update.
John
samsung x20 problem
Discussion in 'Samsung' started by Breakah, Mar 20, 2010.