The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    A100-Vista Upgrade Problems!

    Discussion in 'Toshiba' started by tha_bandit, Feb 19, 2007.

  1. tha_bandit

    tha_bandit Notebook Enthusiast

    Reputations:
    0
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    15
    hello all....just installed vista on my a100-ta7. setup is flawless, no problems.
    THe biggest problem i have had is that the INTEL 945 chipset display upgrade will always fail (screen goes blank and hard reset must be done).

    another thing that is bothering me that TOSHIBA drivers (the value added package for the fn keys, etc.) will not install. gives me an error ez_noinstall of some kind.

    Anyone try this yet and know what the problem is.....
     
  2. tha_bandit

    tha_bandit Notebook Enthusiast

    Reputations:
    0
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    15
  3. mcunha71

    mcunha71 Notebook Geek

    Reputations:
    3
    Messages:
    87
    Likes Received:
    0
    Trophy Points:
    15
    Hi,

    With a BIOS update, the keys will work without the fnkey software.

    This is the main problem. After the key works, everything else will be fixed. You'll be able to install the value package without errors.
    After solve the problem, I found this observation at Toshiba Windows Vista Upgrade Procedure Information for Satellite (PDF file, available at http://vistadl.toshiba.com/)

    This time, Toshiba battery manager isn't so necessary (but is good install it!). Vista's power center uses the same Toshiba's power manager principle: many scenarios, several deep switches. The only important option added by Toshiba is cooling method. The main problem is put the fn keys to work, independently from value pack (with I must say again, will work after bios upd).

    Good luck!
     
  4. tha_bandit

    tha_bandit Notebook Enthusiast

    Reputations:
    0
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    15
    Thanks! I got it to work. new bios version 5.10 installed and valued added package installed flawlessly....the new setup for the Fn keys is very very nice!

    Now just gotta get that intel 945 display driver to install somehow.....? any ideas...i know others have the same problem
     
  5. mcunha71

    mcunha71 Notebook Geek

    Reputations:
    3
    Messages:
    87
    Likes Received:
    0
    Trophy Points:
    15
  6. tha_bandit

    tha_bandit Notebook Enthusiast

    Reputations:
    0
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    15
    Thanks for the response....i checked out the intel drivers....should have tried that....

    but anyways i used the drivers on toshiba website and it took a while to install but finally got through it.

    thanks