I have an 105-s2051 when ever i can put the "stock" ram in (512 mb ddr2) and a stick of ram (1gb ddr2) she boots just fine.. i try to replace the 512 stick or take it out it just keep resetting! i got two gigs of ram to put in there! please help!
Thanks
-
Reset in the sense, that it does not POST.
-
it resets, before i can even load the bios, no "toshiba" screen or anything... -
Power-On Self Test -- Small digits/characters appear on the screen giving details of the initiated hardware. Do you see that ?
Does some Toshiba screen come up or the screen just remains blank ?
Have you tried to load, with a single 1GB module installed ? <-- (Tried this with both the modules ?) -
no screen loads
i have tried every combination i can think of i have a few laptops that i have used the memory in and out of.. they are fine i checked them..
so 3 sticks of 1 gb ram and 1 512 gb stick... none of them will boot together or by themself to boot the system, the 512 mb stick must be install with any of them -
Check if there is a BIOS update.
Updating the BIOS could fix these faults.
A105-s2051 resets when i try to upgrade the ram!?
Discussion in 'Toshiba' started by krypticn, Sep 12, 2008.