The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Adding RAM to M45-S265

    Discussion in 'Toshiba' started by fremontkid, Sep 5, 2005.

  1. fremontkid

    fremontkid Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Does anyone has experience adding RAM to the M45, is it difficult? I pretty know my way on how to add RAM on desktops but this will be my first attempt on a laptop. Is this a task better left for the professional?

    Thanks
     
    fremontkid, Sep 5, 2005
    #1
  2. ZaZ

    ZaZ Super Model Super Moderator

    Reputations:
    4,982
    Messages:
    34,001
    Likes Received:
    1,415
    Trophy Points:
    581
    Typically there is a panel on the bottom you pop off and put the memory in. Depending on whether your model has one or two sticks in it presently there may already be a stick in there. If not you just slide the memory in. The memory is notched so it can only go one way. If there is one in there, take it out and put the new one in. In the past Toshiba has tended to leave one slot open, not sure if this is true on the new ones. I personally wouldn't pay someone to do it. If you are unsure look in the service manual, it should be covered in there somewhere. Good Luck.
     
    ZaZ, Sep 5, 2005
    #2