The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Charger Help!!

    Discussion in 'Toshiba' started by ronnieb, Jan 6, 2009.

  1. ronnieb

    ronnieb Representing the Canucks

    Reputations:
    613
    Messages:
    1,869
    Likes Received:
    0
    Trophy Points:
    55
    So I just received a Toshiba Satellite M70-SR3 for free (a tiny bit of a step up over my tablet, plus its 15 inches) and 2 gigs of ram from another friend for it.

    Now the problem is, she didn't give me her charger since she gave it to her sister in law (whole story was the computer kept giving her blue screen so she spent around $2000 for applecare and all that so she just handed it over to me) and a universal charger goes for around $60+.

    So the laptop specifications for a charger is: 19 volts, 3.42 A.

    The charger i found is for an old Texas Instruments laptop, but it fits the Toshiba perfectly. The specifications for the TI charger is: 19 volts, 1.9 A, and when I plug it in, the laptop lights turn on, but when I go to turn the computer on it won't turn on.

    I took apart the computer to clean it so I'm wondering:

    1.) Did I forget to hook something back up and that's why the computers not turning on?
    2.) OR is the chargers specs too low.
     
  2. Adam24367

    Adam24367 Notebook Consultant

    Reputations:
    7
    Messages:
    140
    Likes Received:
    0
    Trophy Points:
    30
    The Charger is only 1.9 Amps. 1.9x19 = 36.1 Watts
    The laptop charger uses 64.98 Watts (1.9x3.42).
    So when the computer is not using any energy, There is enough wattage to charge the computer, but when the computer is on, it uses more energy and requires more watts, so thats why it doesn't work.
    Charger is too weak.
    I Found a charger for you that will work, Its for the M70 Series
    http://www.notebooksupplies.com/toshiba/satellitem70.html
     
  3. crown711

    crown711 Notebook Enthusiast

    Reputations:
    0
    Messages:
    36
    Likes Received:
    0
    Trophy Points:
    15
    Toshiba Satellite M70-SR3 ,pull up factory specs for your lappy,you will find even if it fits ,does not mean it will not explode on you.
    just my $.02
     
  4. ronnieb

    ronnieb Representing the Canucks

    Reputations:
    613
    Messages:
    1,869
    Likes Received:
    0
    Trophy Points:
    55
    Alright thanks guys. Might as well pull on the $70 iGo charger :)

    Thanks for the clarifications. I knew it wouldn't damage my motherboard since it had lower specifications
     
  5. Jernkar

    Jernkar Notebook Consultant

    Reputations:
    13
    Messages:
    212
    Likes Received:
    0
    Trophy Points:
    30
    I'ld unplug it and not use it at all. This last weekend I used a good Toshiba 19v 3.42 charger that was handy for a A215 with a dead battery, that needed a 19v 3.95 charger. After about a half hour I could smell something hot. Then wisps of smoke came up from behind the screen and the laptop switched to "battery" and the charger was too hot to touch and works no more.
     
  6. allan_huang

    allan_huang Notebook Deity

    Reputations:
    25
    Messages:
    1,030
    Likes Received:
    0
    Trophy Points:
    55
    :eek: Lol never do that with an empty battery, you need all 75w to charge your battery and run your computer, not 65w lol. About 30-40w goes to charging the battery and then depending what you are doing, you need a least 35-40w to run your computers. With exception of the new Intel cpus, all mainstream cpus were rated around 35w tdp, + you got your hdd, screen, and your mobo.