The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Incorrect settings on M400 & M5

    Discussion in 'Toshiba' started by klonny, Sep 5, 2006.

  1. klonny

    klonny Notebook Guru

    Reputations:
    0
    Messages:
    65
    Likes Received:
    0
    Trophy Points:
    15
    I just read this blurb
    Portege M400 and Tecra M5: incorrect configuration settings

    Document ID: 98082013
    Posted Date: 07/06/06
    Last Updated: 07/14/06
    Category: Battery, Power Management, Performance
    Distribution: Public
    Applicable Models: Portege M400, M400-S933, M405-S8003, M400-ST9113, M400-S4032, M400-S4031
    Tecra M5-S433, M5, M5-ST8112, M5-ST1412, M5-S5331

    Here is the link
    http://www.csd.toshiba.com/cgi-bin/...neID=ccceaddikdkdfghcgfkceghdgngdgmm.0&ct=SBs

    Somethign to do with being able to dynamicaly change the power settings the CPU..I did what they said and when you crank to "high power" I (think) I can really tell a difference...any way FYI
     
    klonny, Sep 5, 2006
    #1