The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    LCD Compatibility

    Discussion in 'Toshiba' started by SlimShady, Jun 24, 2008.

  1. SlimShady

    SlimShady ΜΟΛΩΝ ΛΑΒ&

    Reputations:
    806
    Messages:
    979
    Likes Received:
    20
    Trophy Points:
    31
    Does anyone know if the screen from an X205-S9359 is a bolt on replacement for the screen from an X205-S9349? Is the wiring the same, all the connections use the same plugs and go to the same points on the motherboard etc??
     
    SlimShady, Jun 24, 2008
    #1
  2. SHAWNEEK

    SHAWNEEK Notebook Enthusiast

    Reputations:
    1
    Messages:
    24
    Likes Received:
    0
    Trophy Points:
    5
    Yes they are... the things that go together are: The LCD Flex cable, the camera unit and the FL Inverter. If you move the whole kit then you are ok to go.. The MB connector is the same on all the X205's...
     
    SHAWNEEK, Jun 24, 2008
    #2