The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Toshiba Satellite Pro A120-216 questions

    Discussion in 'Toshiba' started by >HyperlogiK, May 21, 2007.

  1. >HyperlogiK

    >HyperlogiK Notebook Geek

    Reputations:
    13
    Messages:
    83
    Likes Received:
    0
    Trophy Points:
    15
    Hi, I know similar questions have been asked about other Toshiba Xpress 200M machines, but they didn't really clear up my problems.

    I have this laptop running a Celeron M 1.73 Ghz (533Mhz FSB) and 2x 1GB DDR2 667Mhz running at 533Mhz in single channel. I run the CPU at 2.1Ghz (667Mhz FSB) during intensive tasks and a few low spec games, but the FSB and memory are running asychronously. Also a friend has offered me a 667Mhz FSB Yonah as a replacement CPU.

    My questions are as follows:

    -How can I force the memory to run at 667Mhz.

    - Can I force it to run in dual channel? The sticks are identical, even the same batch no, and obviously the chipset supports DC, but they don't do DC by default and the BIOS has no obvious option to set it (in fact it has barely any options for anything).
     
    >HyperlogiK, May 21, 2007
    #1