The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.

Problems? See this thread at archive.org.

CF-18 motherboard trade anyone?

Discussion in 'ToughBook Buy Sell and Trade Forum' started by jd-975, Oct 9, 2010.

jd-975 Notebook Enthusiast

Reputations:

39

Messages:

28

Likes Received:

0

Trophy Points:

5

Hi I have a fully working Motherboard from a MK3 Digitizer CF-18 that I`ve bought in error, the part number is DL3UP1425BAA and the model number in bios is CF-18FDH25VE, it has 512mb onboard ram and 1.1 Ghz chip, as I say has been extensively tested and works perfectly.

I`m looking for a motherboard from a regular touchscreen version ideally with the 512mb onboard ram also, If anyone has one and they fancy a trade let me know at [email protected], I`m in the UK but if you dont mind shipping I dont

jd-975, Oct 9, 2010

#1
sergeirichard Notebook Guru

Reputations:

12

Messages:

50

Likes Received:

0

Trophy Points:

15

I was told the digitizer and touch version motherboards were identical...

(Which would make sense if the screen sensor is just a USB device.)

sergeirichard, Oct 18, 2010

#2
jd-975 Notebook Enthusiast

Reputations:

39

Messages:

28

Likes Received:

0

Trophy Points:

5

No mate as I`ve found at my cost they are not, I have a touchscreen model laptop with a digitizer motherboard, the digitizer motherboard has an extra connector under the keyboard where the screen cable etc plugs in and also does not support a serial port which I need. The screen sensor as such is not a usb device but has native support on the motherboard so one is not compatible with the other.

jd-975, Oct 21, 2010

#3