FT: CF-30 OEM AC Adapters/Optical Drives for CF-52 OEM AC Adapters

1) I have two OEM Panasonic 5A AC Adapters and Two CF-30 CF-VDR-302U Drive packs that I am willing to trade for OEM Panasonic CF-52 AC Adapters, I believe they are 8A. I need two of these total.

2) Used

3) No pictures, under $100 vale items

4) Want to even trade AC adapters or an optical drive pack for a CF-52 OEM AC Adapter.

5) Straight Trade

6) USPS Flat Rate Envelope

7) Feedback eBay User EuroZX3Focus, 100% Positive ( Link Here)

8) Please let me know if you have any questions, looking for OEM AC Adapters ONLY.
----------------------------------------------------------
Attention Buyers: Please do not offer less than what the original poster asked for unless they specify "Best Offer". If you have a question about the price of an item please private message the original poster.

 

PM sent with alternative idea.

 

Won't the CF-30 adapters work on the CF-52? That's what I just gave to my Mom for the CF-52 I built her.

 

Same here, I use it on my CF-52MK4 and CF-53MK1

 

ibm 7.5 amp....solder on a new end,.......Bob's ur uncle..

 

Rick,
I thought the CF-52 requires a 15.6v 8A adapter where the CF-30 adapter is a 15.6v 5A adapter. The two CF-52s that I purchased always came with an OEM 8A. I know the CF-30 adapter will work, but isn't it bad for it to run under amped?

I also noticed the bottom of the CF-52 machine says DC IN 15.6v 7.05A

Thoughts?

 

It will "work". It won't charge the battery as fast though. Personally I use above mentioned 7.5 amp IBM charger on my cf52. I know a lot of other guys here use the smaller amp chargers... I won't...Panasonic set the specs that high for a reason. "I" believe it will shorten the life and performance of the cf52 to under amp it. At the very least it will shorten the life of the charger as it has to constantly work so hard. Higher amp draw means higher heat. But that's my opinion.

 

Sent pm, found just 1.

 

PMd back, thanks!

 

The newer the 52 the more the draw if it has the ATI card. The standard IBM charger has no problem with my sons Mk1 with ATI HD2300, but his MK2 with ATI 3650 has problems charging the battery and working at the same time. I have a larger charger we were going to test to see if that solved his problem, just haven't dug it out yet.

 

Cleaned up a pile of TB projects last night and found two used CF-AA5803A units with 8.0 amp output rating, so shoot me a pm if you're still needing these.