Fs Cf -28 ++SOLD++

==========================================================
1) [CF-28 model # CF28stjg8kmbkb 13"touch screen (working, no scratches) XPPRO new install with all updates & COA; CD & floppy drives; 2 batterys both show 2+ hrs on full charge; charger; 1.0GHZ; 512 ram; all ports &covers present; working wifi; 40 gig HDD 88%free; illuminated keyboard (non rubber);open office software and updated AVG antivirus. Top HAS been repainted well, chassis has usual scrapes & chips. Machine works very well.
3) pix attached
4) [$250.00 USD

5) [Paypal / Gold / Money orders / Cash (no checks from Nigeria)

6) [buyers choice, best way, Fedex Ground is cheap

7) [Ebay ID = fredwc1 (100%) 600+ feedback
8) [Additional comments about the item]
----------------------------------------------------------
Attention Buyers: Please do not offer less than what the original poster asked for unless they specify "Best Offer". If you have a question about the price of an item please private message the original poster.
==========================================================

 

That's a nice setup for a CF-28.... Someone should jump all over that!

 

Especially with two good batteries, I also like how he accepts payment in gold

 

I am thinking of getting this what would happen if stick the drive from my cf-28 MK1 600 mhz would windows handle it or would it screw up.

 

If it’s an optical drive they are universally compatible on cf-27 /28 and cf-29 models
If you are asking about the hard drive, no you will blue screen the computer and have to format and reload xp

Alex

 

damn, was hoping to avoid the hassle. I recall one time I switched hard drives between a pentium 233 to a 400 mhz and windows coughed a little bit, but it accepeted it. I was kinda surprised.

 

well i call dibs. let me know your paypal address my ebay id is eno801

 

Thank you all for your comments, it is sold. I will remove this as soon as I figure out HOW!

 

I just marked it sold for you

Alex

 

Dang... And I have all these Krugerrands around here....

 

while we are here jawing away I have an acronis image of the above mentioned 600mhz MK1 can I do a universal restore with that? it is supposed to restore the HAL layer to a different machine.

 

Why do you want to put your mk-1 hard drive in the mk-3?


Alex

 

hey why not? lol, no really I just want to test the universal restore option I never had a need to use it, why not now. I don't have anything important to lose besides season 2 of gossip girl. worst comes to worst I have to reinstall windows. and if it works well I had the CF-28 hard drive set up nice. I just reinstalled everything a couple of weeks ago due to hdd failure on a new drive. everything tweaked and updated

 

Well there is a couple of small differences on the caddies
First is that there is a height difference , not too much of an issue I have swapped them around
And what I have found on the later mk#s was that some were equipped with a hard drive heater

Alex

 

From what I heard the earlier CF-28 caddies will fit the later, but not the other way around. I have to search the threads maybe I got it wrong

 

I don't remember for sure ,but it makes sence that if the later is higher you can't jam it in lol

Alex

 

The CF-28 Mk1 HDD caddy is "Universal Donor". Later models are a few mm thicker due to the addition of the HDD heater; just enough to prevent closing the battery door. However Modly has stated that they can be "massaged" a bit to fit in the Mk1; it just takes some patience.

mnem <~~~ CF-28-ily ~~~<<<