old cf19 finger reader buying

hi
can anyone please tell me where can i purchase the finger print reader for my old cf19? please provide me with the website where i can purchase one..thanks..

 

Heartland Services

Is the place we buy parts

Read this thread

http://forum.notebookreview.com/panasonic/339911-cf-19-fingerprint-install-w-pictures.html



Alex

 

do you know which tab should i go to purchase stuff..it doesn't see to have any "products" page where i can actually purchase stuffs..thanks..

 

You will need to contact them by telephone
They don't make it easy







Alex

 

You can also email them at [email protected] . You will need to give them your full model number CF-19####### and the part number of the finger print reader. It takes 2-5 days for a reply.
Now you say old 19 so I am guessing it a CF-19C (MK1) ? If your 19 doesn't have a reader in it now then you need to send them a CF-19 model number which has one...why you ask ...when she lookes it up in her service manual to check it your model number will show "none installed" and she will email you back saying " wrong model #" and you will play "email tag" for the next couple weeks . They are very good to deal with... really... as long as you have the correct model number. The reason why I am telling you this is it happen to me last month. I placed an order for me and Teo. The parts were for a MK3 but I was giving her my MK1 model #. Three weeks later I got to place my order. I am not blaming them....they just want to be sure I am ordering the right part.
Below is two CF-19's MK1 that have the fingerprinter reader installed in them if that helps. Sorry I do not have the part #

CF-19CCBJXVM - Digitizer screen
CF-19CHBJXBM - touchscreen

 

hey guys
i believe mine is CF-19CHB10BM..I dont know if its mk1 or mk2 etc. also i know it is out of the topic question..do you guys know how to remove the bottom cover on the toughbook..yesterday when i tried to removed all the screws and it seems like it didn't wanted to spread apart..looks like something is still holding it together even all the screws are out ....do i have to force it out really hard with the flat screw driver? if i do i know i'm gonna break something so i put it back together..i bought the gps kit which i wanted to install..so please guys any suggestion will be appreciated!

also one more quick question...i also have to rubber backlit keyboard which i bought used..is it hard to install as well? do i need to lift up the whole motheboard to install it or..is there any other easy way? thanks again..

 

Read the manual , You might of missed some screws
+ you will see on whats needed to replace the keyboard
The keyboard is easy to change

http://www.modly.net/servicemanuals/CF-19C-Service-Manual.pdf





Alex

 

If the Model Number is correct it's a Mk1:

CF-19CHB10BM DESCRIPTION:
***VERIZON ONLY***
Intel Core Duo U2400 1.06GHz (Centrino), 10.4" Touch Screen XGA, 80GB HDD, 512MB RAM, Intel 802.11a/b/g, Wireless Ready, Dual pass-through (Upper WWAN, Lower GPS), Win XP Pro SP2, TPM1.2 Security Chip, Bluetooth, Verizon EVDO Rev0 WWAN, Verizon Logo Badge, No Optical Drive

 

Have you read this yet http://forum.notebookreview.com/panasonic/339911-cf-19-fingerprint-install-w-pictures.html

The prices are almost 2 years old so I would bet you are looking at $200.00

 

@ toughasnails

That was a informative thread

I quite often search for James posts when there are questions on wwan options as he was one of the most knowledgeable here




Alex