The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    HELP, Sony TZ and Samsung T220 VGA connection no picture

    Discussion in 'VAIO / Sony' started by Sprite, Sep 29, 2008.

  1. Sprite

    Sprite Notebook Consultant

    Reputations:
    2
    Messages:
    133
    Likes Received:
    0
    Trophy Points:
    30
    hi there,

    i have a samsung T220 monitor and a sony TZ. i connected them using a VGA cable and the samsung says "there is no device connected"

    i dont get it, i installed the drivers from the samsung disk and clicked on "Fn + F7 (LCD and monitor display) and the samsung can't pick up any signal from the TZ. am i doing something wrong???
     
    Sprite, Sep 29, 2008
    #1
  2. VCi15

    VCi15 Notebook Guru

    Reputations:
    0
    Messages:
    50
    Likes Received:
    0
    Trophy Points:
    15
    I have the same problem, looking into it right now. My situation is SZ650N/C and Samsung T240HD
     
    VCi15, Oct 1, 2008
    #2
  3. VCi15

    VCi15 Notebook Guru

    Reputations:
    0
    Messages:
    50
    Likes Received:
    0
    Trophy Points:
    15
    ok I just did this and it seemed to work

    VAIO Control Centre --> Plug & Display --> UNCHECK Enable automatic output function i.e. DISABLE it
     
    VCi15, Oct 1, 2008
    #3