The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Hello all I need some assistance

    Discussion in 'VAIO / Sony' started by manny951, Apr 13, 2011.

  1. manny951

    manny951 Notebook Geek

    Reputations:
    0
    Messages:
    96
    Likes Received:
    1
    Trophy Points:
    16
    I am new just been lookin around lately they gave me a laptop Not the beast but it works its a sony vaio vgn-nr22oe ive looked at post in here where they changed the processor to the 2.1 i might do that this 1.6 is pretty slow also i was lookin for a battery to replace this its really dead i tried the freeze method and that really doesnt work lol ive been lookin around i installed windows 7 32 bit on it and wondering whats a good battery to buy also i havent updated the bios dont know where to find it or even look i bought 4gb for it because alot of people say it would only see 3.5 but i can only run 2 gb help please and sorry for my grammer it really sux.. thank u alot guys

    manny
     
  2. killer626

    killer626 Notebook Geek

    Reputations:
    27
    Messages:
    75
    Likes Received:
    0
    Trophy Points:
    15
    Changing a processor on a laptop usually has an 11/10 difficulty rating: you need to unsolder the proc and solder the new one in. With all due respect, if you can't write a 6-line post with more than one sentence so it's understandable, you won't succeed in changing CPUs...

    Moreover, you are mixing up hardware and software limitations: while your motherboard (and BIOS) have a cap on how much RAM can be used, Windows in 32-Bit cannot use more than 3.25Gb of RAM: check your OS, and your Hardware limitations, as the cap may be in the fact that you are running a 32-Bit Windows.

    Finally, for the battery: Google is your friend... http://.com/?q=vgn-nr22+battery

    If possible, might I recommend actually taking 5 minutes to write an understandable post, might make people actually want to answer you.

    Cheers.
     
  3. Gracy123

    Gracy123 Agrees to disagree

    Reputations:
    277
    Messages:
    2,080
    Likes Received:
    7
    Trophy Points:
    56
    To be honest I have problems understanding the post too... everything in one sentence, no structure...

    Maybe try structuring/defining your question(s) better so that you can get answers...
     
  4. arth1

    arth1 a҉r҉t҉h

    Reputations:
    418
    Messages:
    1,910
    Likes Received:
    0
    Trophy Points:
    55
    32-bit Windows Vista/7 can use 4 GB RAM less what's memory mapped addresses to hardware, but only exposes a max of 3120 MB to the user.

    This is a change from XP, where you would get anything up to 3.7 GB, depending on how much was used for memory mapped device addressing. An average PC would typically show between 3.2 and 3.5 GB.
    The cap at 3 GB was probably done to prevent consumer confusion, where two users with the same RAM would see different amounts.
    Why 3120 and not the more natural 3072 (=3 GB)? Again, speculation, but the addressing is done in 48 MB chunks, and the extra chunk is simply there so programmers can easily tell whether the system has 3 GB or >3 GB physical memory.

    To make it even worse, 3 GB doesn't mean that you can run a 3 GB program. In 32-bit Windows programs, there's a max address space per process of 2 GB. This is true even on 64-bit Windows, as long as you run 32-bit programs.

    So if you run 64-bit Windows and 32-bit Photoshop, you won't get much speed benefit from having 8 GB of RAM instead of 3 GB, cause it will only be able to use 2 GB directly.

    Anyhow, the days of 32-bit operating systems is gone. Time to move on.