The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Mounting extracted Sony VPCZ1 Samsung SSD (128 GBx4 RAID)

    Discussion in 'VAIO / Sony' started by atulbutte, Jun 10, 2012.

  1. atulbutte

    atulbutte Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    I have a VPC-Z1190X (VPCZ1190XB-LBOM) purchased back in April 2010, with the 512 GB Samsung SSD setup (actually 128 GB x 2 x 2). Windows 7 did its thing one night and I couldn't boot into the machine since then, nor could I restore it with any Windows tools or CD-ROM.

    Though I have a decent backup, I wanted to try to salvage more files that didn't make it into the nightly backup.

    Using the instructions here:
    I was successfully able to remove the Samsung SSDs and the microSATA ribbon from the laptop.

    I obviously now want to mount this SSD on another computer, either through PCMCIA or (preferably) USB. But mounting this SSD setup seems to be way more challenging than the usual hard disk removal.

    Has anyone ever had luck purchasing an enclosure for this Samsung SSD setup, with the matching/original hardware to support the RAID array across the four SSDs, so that I have some hope of accessing these 4 SSDs as one, just like how Windows was treating it in the original laptop?

    My SSD units are SAMSUNG MMDPE56GQDXP-MVB and I think my original storage controller was an Intel RAID Controller.

    Apologies if this thread already exists, and I just couldn't find it; forum search seems to be broken today.
    Thanks in advance.
     
  2. moogleassassin

    moogleassassin Notebook Consultant

    Reputations:
    53
    Messages:
    201
    Likes Received:
    2
    Trophy Points:
    31
    bump /10char
     
  3. Ashers

    Ashers Notebook Evangelist

    Reputations:
    120
    Messages:
    575
    Likes Received:
    39
    Trophy Points:
    41
  4. atulbutte

    atulbutte Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    Wow, great, very helpful answer, and I didn't see your previous thread!

    Did that startek "12in Micro SATA to SATA with SATA Power Adapter Cable" mentioned in your thread at least work out for you?
     
  5. namaiki

    namaiki "basically rocks" Super Moderator

    Reputations:
    3,905
    Messages:
    6,116
    Likes Received:
    89
    Trophy Points:
    216
    Like me, you have the Z11 which uses different plug for the SSDs. Z12 and newer use the more universal micro SATA plug, but Z11 uses a LIF plug.
     
  6. Ashers

    Ashers Notebook Evangelist

    Reputations:
    120
    Messages:
    575
    Likes Received:
    39
    Trophy Points:
    41
    I never tried it. I just encrypted the entire drive using PGP (and I backup regularly), so that if the PC fails and I have to send it back to Sony to repair, they won't have access to the commercially sensitive material that's on the SSD.