The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    RAID0 on Z2 problem

    Discussion in 'VAIO / Sony' started by naujoks, Mar 2, 2014.

  1. naujoks

    naujoks Notebook Consultant

    Reputations:
    0
    Messages:
    230
    Likes Received:
    1
    Trophy Points:
    31
    Whenever my SSD on my Z2 gets towards being 2/3 full, the RAID array starts to fail, with blue screens, and a "Failed" error message in the RAID screen on startup.
    However, when waiting a bit and trying a couple of times, it comes back to live for a bit, for long enough for me to remove some stuff on the SSD to make it less full.
    Then it keeps going on being fine.
    I thought this was a problem with the particular SSD drive, so I swapped my original 128GB with a 256GB drive, but the same thing keeps happening there.
    Does anyone have any idea what could be wrong and what I could try to fix it? I'm running Win 8.1 by the way.
     
    naujoks, Mar 2, 2014
    #1