The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    SA2 sheet battery won't charge past 80% (battery care off)

    Discussion in 'VAIO / Sony' started by led20719, Nov 17, 2011.

  1. led20719

    led20719 Notebook Enthusiast

    Reputations:
    0
    Messages:
    42
    Likes Received:
    0
    Trophy Points:
    15
    Why all these problems with SA's and sheet btrys?

    I am now charging with the adapter to see if that works.

    I also updated Vaio Control software and same thing.

    What's going on here?
     
  2. jeremyshaw

    jeremyshaw Big time Idiot

    Reputations:
    791
    Messages:
    3,210
    Likes Received:
    231
    Trophy Points:
    131
    Had this issue, too. Never figured a way around it, but I'd guess try toggling the option while the battery is connected? I dunno :(
     
  3. Ashers

    Ashers Notebook Evangelist

    Reputations:
    120
    Messages:
    575
    Likes Received:
    39
    Trophy Points:
    41
    Yes, the setting is recorded in the battery itself. So you need to make sure that both batteries are connected when you change the setting in Vaio Control Centre (I don't know whether VCC has a setting for each battery, I have a Z1).

    If Battery Care is already off, try connecting both batteries, turning Battery Care on, and then turning it back off again. It may then register on both batteries.