The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Sony Vaio PSUs use Active power factor correction PFC?

    Discussion in 'VAIO / Sony' started by Pisani, Sep 23, 2012.

  1. Pisani

    Pisani Notebook Enthusiast

    Reputations:
    0
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    5
    Has anyone had experience with VAIO Z Series and UPS System?
     
  2. beaups

    beaups New Jack Hustler

    Reputations:
    476
    Messages:
    2,376
    Likes Received:
    4
    Trophy Points:
    56
    Well the reality is there isn't too much concern regarding UPS quality due to it being a laptop. However, on the Z2, when power fails with the PMD connected, it hard locks the machine (bummer). So I do use a UPS...a cheap UPS....no issues at all.
     
  3. Pisani

    Pisani Notebook Enthusiast

    Reputations:
    0
    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    5
    The Vaio Z isn’t easy on the wallet.
     
  4. beaups

    beaups New Jack Hustler

    Reputations:
    476
    Messages:
    2,376
    Likes Received:
    4
    Trophy Points:
    56
    Well I'm fresh out of tin foil hats.

    Our power at the office drops all the time (at least 1x/week) and brownouts several times per week. Cheapie ups switches to battery power just fine, and I can continue to work.

    Again, laptops are designed to immediately switch to battery when the power fails, so even if the UPS is crummy, or switches slowly, it really doesn't matter.

    Z2's are a different story, as when power gets cut, the loss of PMD hard locks the unit. But, again, no issues with cheapy UPS.

    And we aren't dealing with complex power supplies that have multiple rails and precision outputs like desktop/workstation users are.