The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    SpeedFan 4.32 and 4.33 Only Showing Core Temps

    Discussion in 'VAIO / Sony' started by Paticle, Feb 20, 2008.

  1. Paticle

    Paticle Notebook Enthusiast

    Reputations:
    4
    Messages:
    40
    Likes Received:
    0
    Trophy Points:
    15
    I had an older version of SpeedFan (the one found on download.com) and it should HDD, Temp1 and Temp2, but no core temps.

    Now, I've tried 4.33 (the latest final version) and 4.32 and both only show the core1 and 2 temps, but not HDD or temp1 and 2.

    What might be the problem?

    The older version of SpeedFan showed my temp1 and 2 at about 129F... and HDD in the 90's. The temp in my house is about 65F

    The newer version of SpeedFan show core1 and core2 at 75F with the ambient temp of 65.

    Is this ok?

    And back to my first question, why won't the new speedfan show HDD and temp 1 and 2?


    Thanks


    Edit: BTW, this is on a new FZ290 with a T7500 and the 200GB 7200RPM HDD
     
    Paticle, Feb 20, 2008
    #1