The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    VGN-FW292 Post Screen-Replacement Issues

    Discussion in 'VAIO / Sony' started by Cheapasfree24, Sep 12, 2010.

  1. Cheapasfree24

    Cheapasfree24 Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    Well I recently replaced the screen on my FW292 because my old one was cracked, and after plugging everything in and reassembling it, the new screen powered on but did not display anything. The computer still works fine, and I can use an external monitor (which is what I've been doing since my screen broke anyways), but it just wasn't outputting video.

    At first I thought that the video cable may have come unplugged when I reassembled the computer, but I just now took the screen apart and discovered the connector securely taped in place like I left it. And as far as I know, the part I ordered was the same as the one that came with my screen (same resolution, back light power, etc).

    So...does anyone know what would be causing this?
     
    Cheapasfree24, Sep 12, 2010
    #1