I have dual boot on my sz440 and need the camera drivers for XP pro. anyone have any luck? i can't use the ones for the sz3xx series because its a different model camera.
sticky this. i think others are having the same prob.![]()
-
Unfortunately the camera is proprietary so you will not be able to bypass sony and grab a manufacturer direct driver. The sony drivers will recognize that even though your partition is XP the board is DMI'd for Vista. No way around it yet.
-ABOVEALLELSE -
there you go, use the pick driver function instead of the search function when you install this driver on xp.
Attached Files:
-
-
thanks!!! that worked! sticky this!
-
thanks!!! that worked! sticky this!
-
Hi! I've tried to dowloads your file vgp-vcc5.zip and when i tried to open i received a message regarding file corrupted. Could you post I'll appreciate a lot !!!
BR
Edgar -
did you download it with a download tool? try download directly using the ie downloader itself, also try unzip it with winrar. the other member download and works for him, so i think the file has no problem.
-
Hi! Yeahhh it works!!! I've downloaded winrar and work it fine!
Thanks a lot!! now i'm driving crazy with the bluettoth device.....
I have an VGN-SZ450N and i want to use XP instead of Vista but as you know the drivers are very difficult to obtain...
Thanks again!!!
Edgar -
the bluetooth driver for sz4 xp is included in this package, but you need patient to download it, it's pretty slow, don't use any of the download tool to download it, you will found out it's currupted after all. -
is that vaio-link site down?
I cannot download nothing from thier. Im having a heck of a time finding these drivers without it. Can anyone get on that ftp?
I downgraded to Xp Pro on a VGN-SZ440 also.
If anyone who has done this still has all the drivers they used for xp pro, and wanted to upload them for me I would greaaaaatly appreciate it.
thank you -
-
How do you open it? -
yea im with him, im having the same problem with that camera, not sure how to install it.
I have:
Mass Storage Controller
PCI bus 9, device 4, function 2
Unknown Device
on Intel(R) 82801GBM (ICH7-M) LPC Interface Controller - 27B9 -
use the pick driver function instead of the search function when you install this driver, after you install it, it might still show as usb webcam, but that's ok, you can now try to run the sony capture tool. and it works like in vista.
-
Tried that.....didnt work. Windows says "The specified location does not contain information about your hardware". I tried cheating and changed the driver properties to .inf that did'nt work either.
I think we need clarification at this point. It would be useful to see what other peoples successful XP installs have produced in device manager.
I would like to post a snapshot of my device manager with all the folders open. But I can't because attachments are not allowed which really doesnt help matters. Is there any way to get my picture into this forum?
I wanted to post my device manager 'screen print' and ask if any one had any comments on the general appearence of my installation after looking at it. Can some one else who has completed an XP install on an SZ-440 share their device list for comparison?
So far I've not had any problems anything since installing XP. I didnt follow the dictated course of installation for XP drivers and used a hotch potch of SZ-330 & 440 drivers in combination with Vista where it worked. -
I think we need clarification at this point. It would be useful to see what other peoples successful XP installs have produced in device manager.
I would like to post a snapshot of my device manager with all the folders open. But I can't because attachments are not allowed which really doesnt help matters. Is there any way to get my picture into this forum?
I wanted to post my device manager 'screen print' and ask if any one had any comments on the general appearence of my installation after looking at it. Can some one else who has completed an XP install on an SZ-440 share their device list for comparison?
So far I've not had any problems anything since installing XP. I didnt follow the dictated course of installation for XP drivers and used a hotch potch of SZ-330 & 440 drivers in combination with Vista where it worked. -
I'm sorry say that I'm no longer convinced that this driver isnt corrupt. My reasonong is this:-
First as a zip file it should be possible to extract it with either Win Zip or Windows explorer neither of which works on this particular file. Second there is something fundementaly wrong with the fact that WinRar will open it when the proprietory software wont! In order to prove me wrong please upload this driver again. I suggest using WinRar -
Will this work for the VGP-VCC4 cameras?
-
It works with me.
To install it you need to do the following
First
From the control panel
1-Select add hardware
2-Next
3-Yes, I Have
4-Next
5-Last one Add a new hardware device
6-Next
7-Install the hardware
8-Next
9-Imaging device
10-Next
11-Have disk
12-Select the place where you unzip the file
13-Select R5u870fl.inf
14-Open
15-OK
16-Next
17-Select BT port (com10)
18-Next
19-Next
20-Continue anyway
21-Finish
Now the system recognaize the divaice
1-Go to the device manager
2-Dubel click usb video device
3-In the driver tab click update driver
4-Install from a list or ..
5-Next
6-Select dont search. I will
7-Next
8-Select sony visual communication camera VGP-VCC5
9-Next
10-Continue anyway
11-Finish
12-Close
13-In the device manager click with right mouse the sony visual com .. and 14-select uninstall
It will work now
There must be a shorter step to do this but this is the way I did it -
If someone could confirm @wwb95's work then that would be great. And if anyone could confirm it with VCC4 cameras too that would be awesome!
-
no .inf or anything after it...maybe that is the wrong file they uploaded on page 1 of this thread? -
Yeah, the driver I downlaoded was VGP-VCC5 not R5u870fl.inf. ..... That would explain it. Its either the wrong driver or corrupt.
-
OK, now I know the right driver isnt the download in this thread. Forget wuruoyu's zip file its very wrong! The right driver is R5u870fl.inf......Thanks to wwb95 for mentioning it and for the instructions.
I looked in my download collection and found another driver file that contained wwb95's aforementioned R5u870fl.inf
After following his guide which is a long winded process ( how on earth did you figure out the proceedure? ) it works! Thanks again to wwb95 if he had not mentioned the driver name I & hopefully now customgt would still be stumped! -
Here is the correct file. Just follow wwb95's instructions.
Attached Files:
-
-
Something very strange is happening here. I thought I would check that my zip worked OK so I just downloaded it and guess what? Now its corrupt! Same problem as with wuruoyu's zip. Apologies to wuruoyu looks like I've sufferred the same fate as his did.
It should contain these four files :-
R5U870FL.inf
r5u870flx86.cat
R5U870FLx86.sys
R5U870FUx86.sys
but you can only open using WinRar and then its useless as VGP-VCC5!
Can the administrator check whats happening here? -
it can be downloaded from here now:
http://www.notebookreview.com/assets/22218.zip -
In installed the driver, then went to device manager to update the driver for the camera.
After doing that it says:
This device cannot start. (Code 10)
ive restarted the laptop, still nothing...not sure what is wrong? -
Yeah I got that. You've got to follow wwb95's instructions to the letter. Start again by unistalling and then take it one step at a time. It'll work then
-
I can't see BT PORT COM 10 , in the list. Only this is missing in my process.
What is the wrong? -
on step 2 on the bottom, i was selecting the sony device instead of "USB Video Device"
cool
thanks! -
i did it and it's working now, perfectly. But i still have bluetooth and fingerprint problem. How can I sort them out?
-
UPEK® TouchChip FingerPrint Coprocessor Driver
Then get the Software:
The SZ4_Utilities biometcric installer will work.
The sz3_utilities biometric is empty some reason...
Get the bluetooth from the SZ4 packages also -
I can't install the camera because I don't have Bluetooth installed properly (when I get to the port screen in wwb95's instructions, there are no options to choose from).
I've used the installers from the European FTP site--both the FE3 one and the SZ4 one, and both tell me to plug in the Bluetooth device during install...and that's where I get lost. Help?
I have a VGN-FE890. -
no luck for me, getting error 39...infact im running on SZ48...all other working, BT working...
-
I downloaded the drivers from the Sony's website in Europe others on the Intel website.
2. Erased Vista partition, Installed XP Pro, programs worked, drivers did not
Sony only has drivers for Vista and not Win XP Pro.
What I still need is:
Camera Drivers
I followed the instructions from wwb95 to the letter but the camera still doesn't work.
2 situations ocurred that are diferent from the instructions:
1st steps, Item 17-Select BT port (com10)
I can't see BT PORT COM 10 , in the list.
Only this is missing in my process.
What is the wrong?
2nd step, Item 8-Select sony visual communication camera VGP-VCC5
After doing that it says:
This device cannot start. (Code 10)
This is the MOBO info:
Chipset
Detected Chipset:
Mobile Intel(R) 945GM/GMS/940GML Express Chipsets or Intel(R) 945GT Express Chipset
Chipset Components
Memory Controller:
82945GM/GMS/82940GML or 82945GT
I/O Controller:
Intel(R) 82801GBM I/O controller hub (ICH7M)
Thanks for all.
Ernani -
Did you dl the drivers from this website?
ftp://ftp.vaio-link.com/pub/Vaio/Original/
Cuz like you said Sony does not offer XP drivers. -
I have tried to follow these instructions and have not gotten anywhere either.
Is the VGN-FE880E the only computer that Sony used the VGP-CC4 in? -
Hi,
I downloaded the drivers from the Sony/Serbian website.
The file is called FE3_drivers and the utilities file is called FE3_utilities, I got everyhting working but the camera.
I just about ran out of ideas.... does anybody else have any tips on how to get this camera working?
Thanks... Ernani -
-
-
-
I think it is a memory hog, and I really got no benefits from whatsoever, so that is why I switched back to Windows XP.
Yea I am not really worried about the webcam thing to much, I am just glad I got everything else working, which to me is more important. (Firewire, Nic and etc) -
I'm in the same boat as you guys... I got everything to work ( i think) except for the webcam (sony camera utilties software etc)
Did u get your brightness adjustment LCD to work? (FN + F5 + F6) let me know... I'm reformated my wife's fe855e and I can't get the camera or the lcd brightness adjustment hotkeys to work.. thanks -
There is a link in the new Vaio FE880 Thread that has the drivers for the webcam in Windows XP.
THer other features such as FN are not found as of yet. -
Thx to wuruoyu!! That works!!
-
having heard so many success and failure from all the guys around here. i have a little suggestion that can settle all issues regarding our beautiful sz. alot of users are complaining abt the lack of support from sony to provide support for sz in xp. since there are so many success cases in the forum, y not gather all the successful and working drivers for sz and sticky it in this forum? so future users and download them easily and make our sz work like beauties in XP! i am one of the many sz users that is waiting for the package to be up. cheers to all the successful guys whom had their sz working in XP and are willing to help the rest!
-
I wonder is it possible for all of us to write a huge letter to Sony and have people sign it so that we could tell them to support XP drivers.
-
i have same issue
find the solving plz -
ftp://ftp.vaio-link.com/pub/Vaio/Original/
I tried with FE_3, FE_4 and FE_11.... the FE_11 has the VCC4 driver for the camera in xp.
Thanks a lot to everyone, i hope you can get the best perfomance for their machines. -
pls dont misguide. fe11_drivers does not vgp-vcc4 drivers. it has vcc1. Every1 needs vcc4. The AR series also uses vcc4 i guess. If anyone can download their driver files from ftp://ftp.vaio-link.com/pub/vaio/original and check out which model has vcc4 version, then every1's problems wil b solved. Im at a place where internet access is alow and limited so cant download them.. Pls some1 download a1_drivers, a2_drivers ... til a5_drivers and then a11_drivers... I have found the solution. Now the implementation is on the other people
need XP camera driver for vcc5 sz440
Discussion in 'VAIO / Sony' started by hsuntiger, Apr 20, 2007.