The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    vaio tz RAM underclocked issue

    Discussion in 'VAIO / Sony' started by decebal, Mar 20, 2009.

  1. decebal

    decebal Newbie

    Reputations:
    0
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    5
    Hello,

    I have a TZ250N with the stock ram. When I check the ram with "memtest" it shows :
    177 MHz (DDR 354) / CAS 3-3-3-9 / Single Channel (64 bits)

    Normally the ram should be DDR 667 .

    I tried to replace the ram with another 2 gig stick from another laptop and I had even worst result 154 MHZ .

    Anybody has any idea why it shows that and how to tell the bios to detect the ram correctly and get it to work as DDR 667 ? What could be wrong

    thanks a ton for your time and help
     
  2. namaiki

    namaiki "basically rocks" Super Moderator

    Reputations:
    3,905
    Messages:
    6,116
    Likes Received:
    89
    Trophy Points:
    216
    Download CPU-z from cpuid.com and check what it says for memory speed.
     
  3. decebal

    decebal Newbie

    Reputations:
    0
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    5
    It says Dram Frequency 199.5 Mhz
    fsb.dram 2:3
    3-3-9-12


    is this normal?

    thanks again
     
  4. ngvuanh

    ngvuanh Notebook Deity

    Reputations:
    288
    Messages:
    1,168
    Likes Received:
    31
    Trophy Points:
    66
    If I remember correctly, RAM speed can be set in BIOS or VAIO Control Center
     
  5. decebal

    decebal Newbie

    Reputations:
    0
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    5
    There is nothing in BIOS, unless there is some key to hit to get in an "advanced" bios mode. In regular bios I only can set up password/time/etc . very basic nothing about ram.

    Am I missing something?
     
  6. philfree

    philfree Notebook Geek

    Reputations:
    10
    Messages:
    93
    Likes Received:
    0
    Trophy Points:
    15
    Open Vaio Control Center, there should be an option under performance tab in system information if I remember correctly
     
  7. Sick Nick

    Sick Nick Notebook Consultant

    Reputations:
    61
    Messages:
    148
    Likes Received:
    0
    Trophy Points:
    30
    You can set it at 400 Mhz (system default) or 533 Mhz. I dont know why it isnt at 533 default, faster but doensnt use more power from the battery, I've changed it myself to the higher speed.
    The 667 Mhz fsb is not available in TZ models. The U7600 cpu used in it only goes to 533 Mhz.
     
  8. decebal

    decebal Newbie

    Reputations:
    0
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    5
    thanks for the advice. I changed it in Control Center and it shows now as:
    DRAM Freq: 266 Mhz

    thanks
     
  9. Sick Nick

    Sick Nick Notebook Consultant

    Reputations:
    61
    Messages:
    148
    Likes Received:
    0
    Trophy Points:
    30
    That is the correct speed, since its DDR the effective working frequency is 266x2 = 533 Mhz. Previously it was working at 200x2 = 400 Mhz.