The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Help please - Cannot run nVidia/nTune stability Test..

    Discussion in 'Windows OS and Software' started by fonduekid, Aug 7, 2011.

  1. fonduekid

    fonduekid JSUTAONHTERBIRCKINTEHWLAL

    Reputations:
    1,407
    Messages:
    3,396
    Likes Received:
    0
    Trophy Points:
    105
    Hi All,

    I am not able to run the nTune Stability test.. I can just open the nVidia Control Panel and thats it.

    Can anyone help me with this? The graphic card and everything is working fine, the drivers are latest and working fine as well.. the nTune service is also running.

    Thanks in advance.. cheers.
     
  2. Fishon

    Fishon I Will Close You

    Reputations:
    8,383
    Messages:
    1,335
    Likes Received:
    9,061
    Trophy Points:
    531
    System Requirements

    • Supported Motherboards:
    NVIDIA nTune version 5.0 supports only motherboards with nForce processors,
    with the exception of the following:
    • nForce1
    • nForce mobile edition processors
    • nForce server class processors
    NVIDIA nTune version 5.05 and later supports all motherboards, not just
    motherboards with nForce processors, for the following features:
    • GPU overclocking and fan control using the nTune Performance page in the
    NVIDIA Control Panel
    • System performance monitoring and GPU temperature monitoring using the
    nTune NVIDIA Monitor
    • Supported Processors
    • All AMD K7 (except Duron) processors
    • AMD Athlon 64 FX processors
    • AMD Opteron processors
    • AMD Sempron processors
    • Intel® Pentium® 4 processor with Hyperthreading support

    Does not work on your system.

    http://downloads.guru3d.com/download.php?det=163

    http://downloads.guru3d.com/OCCT-(OverClock-Checking-Tool)-3.0.0-download-1880.html

    http://www.techpowerup.com/atitool/

    FurMark 1.8.2 download from Guru3D.com