M60 Windows 7 Problems

Hi, there
I have a M60 with Centrino 1,7 and Quadro 770 GPU. I have recently installed a new 200GB / 7200 rpm drive in an external caddy instead of the optical drive. I installed win 7 starter but then i came across a very frustrating problem. When i watch video on youtube i get very jerky movement and a cpu 100%...What could be wrong? For sure it is not the internet connection.

 

I would check your video drivers

 

also how much ram do you have?
later today I will check how youtube is on my M60 with win7

edit
Just checked it on my M60 (specs in sig) and it runs fine no jerky movement.

 

I would bet on the drivers of the card but i can't find any official drivers for Quadro Go770 for windows 7 x86??

My specs are: Centrino 1,7, 2GHz Ram, 200GB HDD/7200 on optical bay caddy, 60GB/5400 on internal ide, Quadro Go770, win 7 x86, 1920X1200 screen, wireless N network card (usb). Operating System on 200GB

 

the driver I am using is 97.15_vista
it should be this one v97.15 Vista 32bit | - LaptopVideo2Go Forums
if it doesn't work let me know

 

I am using the same,, no luck...Can you pls tell me how much load on cpu do you have when on youtube?

I tried to download so i can install again but the modded inf is not available on the link you gave me. Can you pls send it to me-if you have it? ([email protected]). Regards

 

you dont need a modded inf support is built in for your Quadro 700.
cpu on youtube watching tekzilla episode 62 at 480p is between 60% and 65%

 

I am downloading now, and i will let you know. Thanks

 

Updated Drivers, still the same.... Could this be a codecs issue?

 

I don't think so but I would try updating your flash.