5739 g swapped mxm gts250m but ve drv problem

Hello guys,

2day i pulled up my old gt130m than swapped gts250m.it is really faster than old one even without driver in desktop mode.whatever..here is the problem after i swapped it windows saw GTS 250M standard vga graphic driver.Its ok cus old one was gt130m meaning i installed gforce 100m series driver.After all these i searched driver from nvidia site and dowloaded it.The DRV version is WHQL 327.23.But the driver not support it .is there anything else that i can do ?

really need help guys

 

Version of your Windows? 7,XP,8? x64 ir x32?

 

WIN 7 64 BIT but nothng wrong with driver.

 

Possibly,you have to flash your video-cards bios. You bought it from ebay used or new?

 

i bought new mate:/

 

Ask to seller, which notebook BIOS version was flashed intoyour videocard. For example, GT240M are three or four versions of BIOS -for Acer, Asus, Dell... On that depends which drivers you have to use. That is one thing.

Other thing is that you might have to install specific drivers. Try to download bios of your card using NiBiTor software. Than upload it here. I`ll try to recognize, is it for Acer or not. Maybe the problem is there.

 

firstly thnx for your help,
second i downloaded the Nibitor 6.06 like u said.Than i opened it.but nothing in it.Mean when i try to save vga default bios it showed eror.


ithnk card not came with bios

 

the seller has no idea about that.But the truth is card is new and working.

i tried the GPU-Z for stock bios save.



and the bios link GT215.rom
https://hotfile.com/dl/248042150/53636fa/GT215.rar.html

 

Strange. As I can see, the bios is from gts250m, as intended. Try also this driver. If that`ll not help, than you have to ask somebodie else for help at this forum. Try to ask about your problem here.

 

Try modded inf from this website.

 

am I need notebook bios upgrade ?

 

It is necessary to have last BIOS. Last BIOS version has some issue fixes and device list update.

 

which version bios r u suggest mate ? my bios s orginal since i bought it

 

Use this one. Before flashing, read guide on how to flash BIOS. Guide is located at this forum. You can find it through 5739G officials thread.

 

mate, as i know before the flash bios , orginal bios must be set default options. right ?

 

Read this, this and this. And don`t forget to make a crisis disk!

Crisis disks

 

mate not enough eng to understand all these :/ in readmea file says "Windows flash: Please click "ZK63310W.EXE" to update bios." isnt it enough?

 

This is enough if you are 100% confident, that at flashing process through windows nothing goes wrong. Even usual windows service can corrupt the flashing process. After that your BIOS`ll be wrongly flashed (your notebook`ll not work after that). To ensure as maximum % of successive flashing as possible, go safe mode, turn off antivirus and UAC, only after that try to flash your BIOS through windows. Don`t forger to charge the battery on 100% and plug AC to your notebook. Whatever can happen, don`t interrupt the flashing process!

 

okay mate, first i start with safe mode than disable the antivurs program, plugged the adaptor finally install ?

 

Disable UAC through windows control panel. Than plug AC to notebook, charge battery to 100%, than try to flash bios.

 

mate we won i did it. before the bios update i tried to change nvidia inf file its in " C:\NVIDIA\DisplayDriver\195.62\WinVista_Win7_64\International\nvao"
than it'll open the NOTEPAD after that i looked my VGA HARDWARE ID (NOT IN GPU Z) USE WINDOWS to see hardware id like ths


than changed "all codes" which starts with 0CA9
View attachment 102612

%NVIDIA_DEV.0CA9.02% = Section022, pci\ven_10de&dev_ 0CA9&subsys_021E1
than saved and exit, installed the driver.
"C:\NVIDIA\DisplayDriver\195.62\WinVista_Win7_64\International\setup"
its done

THE RESULT iS (sorry for the language :/ )
View attachment 102613

FOR ME ITS VERY GOOD.

T9600 2,8 - 4 GB 1066 MHZ - 120 GB KINGSTON HYPER X SSD - GTS 250 M (WHQL 195.62)

"at last bios is not necessary with ths way"

 

Congratulations, ajoleyte! I`m glad, that you fixed the problem! =)))) Hope to hear new upgrades from you!

 

i hope u wont ve driver problem with m4000.how is m4000 do u ve link ? wondering what it has )

 

That is ebay link. And these are its specs)

 

it looks strong when will u swap it

 

It will be delivered to me from 8th of october to 17th of october. Hope it will be delivered at 8th of october. I`ve searched video card like this for a year, approximatelly. Bought this card, because it is cheap and has ROM chip factory-soldered on it. And yeah, it is really strong card for our notebook.