The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    ACER 9410Z board question

    Discussion in 'Acer' started by J V, Jul 24, 2008.

  1. J V

    J V Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    I have an ACER 9410Z which had a bad dial up modem. To get the modem out there was no acess from underneath. I had to take main board out. Changing the modem was no problem but due to a terrible memory I cannot emember where the wires for the monitor plug into the drive. I have gone over the board numerous times with no luck.

    The wires are black and white and each individually push onto a pin. CAn anyone tell me what pin number it is? Or does anyone have a picture of the board with wires attached?

    Thanks
     
    J V, Jul 24, 2008
    #1
  2. bigozone

    bigozone JellyRoll touring now

    Reputations:
    1,112
    Messages:
    2,730
    Likes Received:
    0
    Trophy Points:
    55
    are you sure those aren't the WIFI antenna wires (those to wires come from the LCD HINGE

    which would attach to the MINI-PCI WIFI adapter....

    do the wires and "plugs" look like those circled in the PICTURE attached below
     

    Attached Files:

    bigozone, Jul 24, 2008
    #2