ACER RS400 Chipset, NEED HELP!!!!

Does anyone know the compatible Intel chipset or CPUs that are compatible with this?
The original CPU is a Celeron 410 M

Thanks

 

Here's the info I got from using SiSoftware Sandra

Processor
Model : Intel(R) Celeron(R) M CPU 410 @ 1.46GHz
Speed : 1.47GHz
Cores per Processor : 1 Unit(s)
Threads per Core : 1 Unit(s)
Type : Mobile
Bus : Intel AGTL+
Package : FC µPGA479M (Socket M)
Rated Speed/FSB : 1460MHz / 4x 133MHz
Multiplier : 11/1x
Minimum/Maximum Multiplier : 6/1x / 11/1x
Generation : G8
Revision/Stepping : E / 8 (0)
Microcode : MU06E839
Core Voltage Rating : 1.263V
Min/Max Core Voltage : 0.713V / 1.263V
Maximum Physical / Virtual Addressing : 32-bit / 32-bit
Native Page Size : 4kB

Co-Processor (FPU)
Speed : 1.47GHz
Type : Built-in
Revision/Stepping : E / 8 (0)

Processor Cache(s)
Internal Data Cache : 32kB, Synchronous, Write-Thru, 8-way set, 64 byte line size
Internal Instruction Cache : 32kB, Synchronous, Write-Back, 8-way set, 64 byte line size
L2 On-board Cache : 1MB, ECC, Synchronous, ATC, 4-way set, 64 byte line size
L2 Cache Multiplier : 1/1x (1467MHz)

Upgradeability
Socket/Slot : uPGA-478
Upgrade Interface : Other
Supported Speed(s) : 2.16GHz+

Environment Monitor 1
Model : Intel Core CPU [P1, C1, M1]
Version : 14.08
Mainboard Specific Support : No

Sensors
CPU Temperature : 43.0°C / 109.4°F td

Features
FPU - Co-Processor Built-in : Yes
VME - Virtual Mode Extensions : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
CX8 - Compare & Exchange 8-bytes Instruction : Yes
APIC - Local APIC Built-in : Yes
SEP - Fast System Call : Yes
MTRR - Memory Type Range Registers : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : No
PSN - Unique Serial Number : No
CLF - Cache Line Flush Support : Yes
DS - Debug Trace & EMON Store : Yes
ACPI - Software Clock Control : Yes
(W)MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
SSE Technology : Yes
SSE2 Technology : Yes
SS - Self Snoop : Yes
HTT - Hyper-Threading Technology : No
TM - Thermal Monitor : Yes
PBE - Pending Break Enable : Yes
IA64 Technology : No
SSE3 Technology : Yes
MON - Monitor/MWait : Yes
DSCPL - CPL qualified Debug Store : No
VMX - Virtual Machine eXtensions : No
EST - Enhanced SpeedStep Technology : No
TM2 - Thermal Monitor 2 : Yes
Supplemental SSE3 Technology : No
CID - Context ID : No
CX16 - Compare & Exchange 16-bytes Instruction : No
xTPR - Send Task Priority Messages : Yes
DCA - Direct Cache Access : No
SSE4.1 Technology : No
SSE4.2 Technology : No
POPCNT - Pop Count : No
DAZ - Denormals Are Zero : Yes

Extended Features
EMMX - Extended MMX Technology : No
3DNow! Technology : No
Extended 3DNow! Technology : No
XD/NX - No-execute Page Protection : Yes
AMD64/EM64T Technology : No

Power Management Features
DTSC - Digital Thermal Sensor Capability : Yes
IDA - Dynamic Acceleration Technology : No
HCFC - Hardware Coordination Feedback Capability : Yes

Advanced Settings
Data Error Checking : No
I/O Queue Depth : 8 request(s)
PM - Performance Monitoring Support : Yes
PEBS - Precise Event Based Sampling Support : No
TM - Thermal Monitor : Yes
TM2 - Thermal Monitor 2 : No
EST - Enhanced SpeedStep Technology : No

 

http://www.intel.com/support/processors/tools/frequencyid/ Intel chip Id i think also tel you chipset

http://www.intel.com/support/chipsets/inf/sb/CS-009266.htm
Intel chipset util

 

Thanks, but after "trying" to install and run the utility 7 times and getting the same 'NonIntelErr' is the reason I'm asking on here.

And yes, I know how and what version to install..