The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Acer 5738ZG CPU swap P8600

    Discussion in 'Acer' started by meschino, Feb 5, 2013.

  1. meschino

    meschino Newbie

    Reputations:
    0
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    Hi,
    I changed my t4300 cpu with a p8600 and it works real good. The problem is that after cleaning everything, drilling 8 holes in the vent grid i have 42-43 idle and in prime i get 88 max. Are these temps bad? I undervolted with rmclock at stable 1.000 v but in cpu-z it has spikes when it reports 1,175. Under prime load cpu-z reports 1.000. Is cpu-z reporting bad?. Also it's a problem if the vcore changes suddenly from 1.000 to 1.175? It can hurt?

    i must mention that after undervotling i get a full load temp of 75-76