The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Acer 6920G High Idle Temperature

    Discussion in 'Acer' started by kirku, Dec 8, 2010.

  1. kirku

    kirku Newbie

    Reputations:
    0
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    Hello there,

    It seems as though I've stumbled across the premier knowledge base for all things Acer!

    Unfortunately I've been experiencing some very high idle CPU and GPU temps on my Acer 6920g. The GPU is always somewhere between 72-80C and the CPU tends to be running between 60-83C. This seems really high considering I'm only running Firefox. These temperatures were monitored with CPUID Hardware Monitor and I'm also running ThrottleStop (thanks for the great guide!) in order to reduce voltage (in an attempt to keep the temps down). It will freeze on me while playing such demanding (!) games as Zuma! I've also taken off the main panel and given it a good clean but was surprised by the relative lack of dust.

    Can anyone please advise the best course of action to get these temps down and restore my notebook to some kind of functionality?
     
  2. downloads

    downloads No, Dee Dee, no! Super Moderator

    Reputations:
    7,729
    Messages:
    8,722
    Likes Received:
    2,231
    Trophy Points:
    331
    I would recommend applying a new layer of high quality thermal compound on the CPU. from what I remember it's easily accessible in 6920G so it's not gonna be too much trouble.
     
  3. kirku

    kirku Newbie

    Reputations:
    0
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    Thanks for the quick reply. I've never applied thermal paste to a CPU before. Does anyone know of a relevant guide? To be honest I would be a little anxious about doing it. Is it easy to ruin anything during the process?
     
  4. TehSuigi

    TehSuigi Notebook Virtuoso

    Reputations:
    931
    Messages:
    3,882
    Likes Received:
    2
    Trophy Points:
    105
    If the main panel is clean, go in and clean out your fan and the copper grille the fan blows on; that's where dust accumulates if it gets through the mesh screen.

    As for thermal paste, there is some risk. If you use a capacitive paste, there's a slim risk of shorting something out. Also, if you use too much paste, it'll actually hamper the efficiency of it. A thin layer is best.
     
  5. kirku

    kirku Newbie

    Reputations:
    0
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    Thanks, I'll try cleaning the fan and see how that works out. I could reapply the thermal paste at a local computer shop but seeing as I'm in China and don't speak Mandarin it might be one step too far! ;)