Aspire 1362 WLMi Bios flash failed.

Hello people , I have one Aspire 1362 WLMi from a friend , and I have get in trouble .

The laptop was working , with some VGA issues from time to time.
Like 3D garbage ( issue with the VGA memory ) .
So in order to fix this issue tried the latest Bios update 1.15 from Windows,
and Bios become corrupted .

I did try one fix , of how to make one Crisis disk , I did that ,
I do have floppy USB drive ... I did turn the small switches 1+2 at on.
And I do have a flash starting , and the laptop does lots of beeps until it finishes .

The point is that I tried lots of Bios versions , like 1.14 1.11 0.9 ( the original ) , and looks that no one was able to undo , the issue caused by the 1.15 !!

In order to do Bios reset , just pulled out the main battery + Bios battery + DC supply ..

But I stack again at the same issue ..

Is there something that I am missing ?

The Crisis tool its from an Acer 5050 , still it does the booting diskette ..
and looks that it loads normally ..
I did let it finish , plus 5 minutes ..

Help if you can .. even by PM

 

Bump and up ...

Any ideas ?

 

Fixed it ...

tech talk here ..

AS 1360: BIOS Passwort löschen - Acer-Userforum.de

useful tip here ... message 11#

Aspire 1360 bios frage! - Seite 2 - Acer-Userforum.de

My tip ... after the process start ( floppy disk starts working) , turn all switch's to off ..
and wait for the long clean beep ..

The crisis tool Acer 5050 , its a failure for the Aspire 1362 WLMi .

The Ver 1.11 installed successfully ..

 

I am new here and have the same problem with my Acer aspire 1362LMI did a bios update and now the laptop does not start. I have put both switches to on and had 10 minutes of beeps but nothing else happend. There are links here to a german site, but I cannot understand it. I have a usb diskette drive, but dont know how to download an original bios update, as I cannot even get into the boot selection, how would I get the usb diskette to work?? hope someone can help me. thanks