The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Aspire 5742g blank screen after turning off HyperThreading

    Discussion in 'Acer' started by peraxx, Feb 23, 2013.

  1. peraxx

    peraxx Notebook Enthusiast

    Reputations:
    0
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    5
    I was messing around with a modded 1.30 InsydeH2O BIOS and I disabled HT and after saving changes and restart, the screen was blank like if it wasnt being powered on. I tried doing a BIOS recovery using the 1.27 BIOS and the 1.30 BIOS but nothing worked. What i did was:

    -Put PEW71x64.fd (also renamed to PEW71.fd) on CD and FAT Formatted 2GB (I also tried a 4GB USB but I read that it wouldnt work) USB FlashDrive
    -Unplug AC adapter and remove Battery
    -Insert FlashDrive onto any of the USB Ports
    -Hold FN + Esc and press the power button
    -Release FN + Esc when the USB FlashDrive light flickers
    -Wait until the Notebook turns off (About 45 seconds after turn on)
    -Try powering on the Notebook again (Same blank screen as before trying BIOS recovery)

    Please help :(
     
  2. k3bli

    k3bli Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    I have the same Problem with my Packard Bell tk85
    please help Us ;((
     
  3. downloads

    downloads No, Dee Dee, no! Super Moderator

    Reputations:
    7,729
    Messages:
    8,722
    Likes Received:
    2,231
    Trophy Points:
    331
    You have to remove CMOS battery or short pins to clear BIOS settings.