I am looking to update the firmware on the HDDVD drive (TS-L802A). The most current one I found is on HP's website, but it is for the same drive. Just wondering if this will work on Acer's drive and if not, can I go back to the previous firmware? Starting to feel like a bull in a china shop, thanks, Dave
-
-
After much trepidation, I have installed the firmware from HP and...... it works great so far!! No clunking noise when I insert the DVD and it plays from autostart. Now I can sleep, tomorrow......... we watch "300"!! -
Good find.. Please post a direct link to it... If you could, post what firmware your 5920G came with, and what the newer firmware number is. Thanks.
-
yes, please do.
-
Ok, here is the link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-52374-1&lc=en&cc=us&dlc=en&product=3442974&os=2093
Previous firmware was like AC05 i think. If you look in sys info, under components, CDROM, you will see "blahblah.........AC05". -
Thanks for the link..
-
Yea this updated rocked. It fixed all my hd-dvd problems. Can watch Planet Earth great now.
-
Ok.. Just finished the firmware update. HD never ran so good... I thought i had a mac for a moment.. lol! This is a must do. I highly recomend it if you have the TS-L802A HD-DVD.
-
mine doesn't read transformers... WTF.. upgraded to all firmwares and haven't work yet
-
Hi
I`ve got TS-L802A drive, I bought it without any laptop, so I dont know which oem is it. Firmware of this drive is AC03. Is it safe to use the one from HP link?
I will paste info from DiscInfo:
DISCINFO VERSION : 1.6.1.6
VENDOR : TOSHIBA
MODEL : DVDW/HD TS-L802A
REVISION : AC03
VENDOR SPECIFIC : 05/09/06E64220
LOADING MECHANISM : Tray
SERIAL NUMBER : ---
NUMBER VOL. LEVELS : 16
BUFFER SIZE : 8192KB
TOSHIBA CODE : RA
TOSHIBA MODEL : Unknown model
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Not Set
USER CHANGES : 5
VENDOR CHANGES : 4
CURRENT REGION : Not set
ANALOG AUDIO PLAY : NO
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 24
MAX CDR WRITE SPEED: 16
Thanks in advance for reply
Cheers -
yes it should be safe to upgrade the firmware
-
That firmware is much older than the HP21 firmware posted earlier. The HP21 Firmware reads (04/12/07) and the AC06 reads (12/11/06) on the firmware updater. Any idea if it's better though as it's specific to Acer?
-
-
HP21 works fine for my AC03 drive from Hong Kong
HD DVD Firmware
Discussion in 'Acer' started by prodigal66, Aug 21, 2007.