The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Help with Acer Aspire 4830T Screen Upgrade

    Discussion in 'Acer' started by siimolen, Jul 1, 2016.

  1. siimolen

    siimolen Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Hi,

    I tried upgrading the LCD screen for Acer Aspire 4830T, I ordered the only 14 inch FullHD screen with 40pin connector that I could find but I failed to notice that the new LCD also needs a separate connection for the backlight. Previous LCD has the same connector already routed from within the LCD panel.

    This is the screen I ordered: AU OPTRONICS B140HAN01.0 HW:2A LED LAPTOP SCREEN COMPATIBLE 14.0" 40PINS

    http://www.ebay.com/itm/400848256380?_trksid=p2057872.m2749.l2648&ssPageName=STRK:MEBIDX:IT

    Is there any way to fix this issue? To get a cable into the backlight connector and connect it somewhere on the laptop for power? Otherwise the screen fits and all, but doesn't currently power on.

    [​IMG] [​IMG]
     
    Last edited: Jul 1, 2016
    siimolen, Jul 1, 2016
    #1