The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    I m about to change the cpu but...

    Discussion in 'Acer' started by sam42, May 3, 2009.

  1. sam42

    sam42 Newbie

    Reputations:
    0
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    Hi !!!

    Well i m about to upgrade my mb acer 5315 for a T8300 or T 7500, i have bios version 1.29. I check its release and since 1.21 it support cpu penryn...
    But on the topic Acer 5315, it is recommended to update to version at least 1.31. Why? Is it important?

    What can happend if i plug the new cpu with a old bios?

    I m looking forward for responses, thanks !!!!!!!!!
     
  2. ATG

    ATG 2x4 Super Moderator

    Reputations:
    3,306
    Messages:
    4,461
    Likes Received:
    344
    Trophy Points:
    151
    Aspire 5315 has known issues like bad fan control, "cold boot" and such which is fixed in the newer versions(1.34 and above). If you're going to upgrade I suggest 1.43 - it's confirmed to be stable and with no issues(for now) with the old ones being fixed.

    You're not obligated to update, the CPU should work with your current one. If the BIOS doesn't support it the laptop simply won't boot. Then you'll need to put the old CPU back, update the BIOS then install the new CPU and try again.
     
  3. Full-English

    Full-English Notebook Deity

    Reputations:
    1,227
    Messages:
    1,512
    Likes Received:
    8
    Trophy Points:
    56
    If I were you I would update the BIOS first, that way you know it will work, just saves the risk of having to put the old CPU back in, then updating it, then putting the new one in. Saves a whole lot of hassle!!!
     
  4. sam42

    sam42 Newbie

    Reputations:
    0
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    5
    thanks guys

    Ok I m going to try without bios update, since 1.29 should support a T8300... And I will post results soon!!!
    Thanks again to both of you
    s
     
  5. hoggie

    hoggie old boy

    Reputations:
    316
    Messages:
    1,627
    Likes Received:
    1
    Trophy Points:
    56
    if i was you Sam i would read the upgrade thread, it has all the answers and some dam good advice.

    we have all worked hard on that thread, and have checked all the advice given.

    any trouble get back to us
    Phil :D