The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Overclocking issue onmy 5920G.

    Discussion in 'Acer' started by jithin6g, Jan 25, 2008.

  1. jithin6g

    jithin6g Notebook Consultant

    Reputations:
    7
    Messages:
    119
    Likes Received:
    0
    Trophy Points:
    30
    Hi Guys,

    I'm facing with the issue of overclocking my 8600GT from some point. I'm using Rivatuner & the Driver version is 169.28.

    my default settings are as follows:

    Core/Mem ration @ 475/950/400:

    at 3d Mark test it jumps to 513 core (with the default settings)

    however if i increase core/memory slowly to Core/Mem @ 500/430 and run a 3d mark.

    the core jumps to 540 and never changes. while i see changes in Memory for the subsequent increase in setps.

    So i would like to know why Core/Shader gets stuck at 540/1080 and never increases?

    Any suggestions guys??

    :confused: :confused:

    Anyone interested to help out here?
     
    jithin6g, Jan 25, 2008
    #1