The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Travelmate 4200 Screen Problems

    Discussion in 'Acer' started by chrisshepherd72, Oct 6, 2011.

  1. chrisshepherd72

    chrisshepherd72 Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    SORRY.. IT SHOULD BE 4200.... NOT 2400 TRAVELMATE

    I wish to know if anyone knows if you can change the connector on the motherboard ( I think it is one the mother board ) which you plug the LCD cable into.
    Since the connector i plug it into on my Laptop has the pins broken so when I plug the connector in the screen does not light up properly.

    I know this must be the fault since I have change the inverter, screen and even the back cover. so I checked this and I noticed the pins broken and moved after I changed all these.
    Should of checked that first.!!!!!!

    if anyone can help it would be great
     
    chrisshepherd72, Oct 6, 2011
    #1