The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Travelmate 5630 display issues

    Discussion in 'Acer' started by c4passion, Dec 20, 2011.

  1. c4passion

    c4passion Notebook Enthusiast

    Reputations:
    0
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    5
    Hi folks,
    I have a aspire 5630 repaired after motherboard death and a strange issue, my lcd displays a blue tint, conecting to a external lcd show normal image, i have tried another acer screen and i have the same thing, the lcd is working good in other laptop ( i have 5102 and 5630).

    I think the problem is in the motherboard conection, or maybe a bad gpu bios?
    There is something to do?

    Thanks guys and sorry for my bad english :p

    I forgot to say it have nvidia7300 go gpu.
     
    c4passion, Dec 20, 2011
    #1
  2. downloads

    downloads No, Dee Dee, no! Super Moderator

    Reputations:
    7,729
    Messages:
    8,722
    Likes Received:
    2,231
    Trophy Points:
    331
    Have you tried different drivers?
    Does the blue tint appear in safe mode?

    BTW I've changed the title to better reflect the contents of the post/thread.
     
    downloads, Dec 20, 2011
    #2
  3. c4passion

    c4passion Notebook Enthusiast

    Reputations:
    0
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    5
    Hi, sorry for the bad tittle, it appears from boot image.
    When i connect external lcd it show normal image and blue tinted in the notebook lcd.
    I have installed last bios and nothing changed.
    Im sure is not a lcd failure because it works fine in 5102 laptop.

    The first run of the new board, the screen showed good and after many reboots it turned to blue tint.
     
    c4passion, Dec 20, 2011
    #3
  4. .NetRolller 3D

    .NetRolller 3D Notebook Deity

    Reputations:
    505
    Messages:
    1,127
    Likes Received:
    14
    Trophy Points:
    56
    Check your LVDS cable. Likely there is a short between Vcc and the blue channel.
     
    .NetRolller 3D, Dec 20, 2011
    #4
  5. c4passion

    c4passion Notebook Enthusiast

    Reputations:
    0
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    5
    i have swaped the screen from 5630 to a 5100, is working good, i put the screen of the 5100 on 5630 and blue tint, i think is the mobo conector
     
    c4passion, Dec 21, 2011
    #5
  6. c4passion

    c4passion Notebook Enthusiast

    Reputations:
    0
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    5
    Someone knows the pinout of the mobo?
     
    c4passion, Dec 30, 2011
    #6